Hive Casting #1

avatar

img_0.6631745705350828.jpg

After my Failure with the build of a Molding Box I ordered one and it arrived a few days ago.

Sunday I had the time to set up the first mold.
I wanted to cast the the Keyring with the Hive Logo.

I don't wanted to do the whole process in a cold dark Cellar...
So I decided to do it in my Apartment, I wouldn't recommend that. 😅
I put a tarp over my living room table and filled the box with the sand. ⏳

img_0.13441344095195054.jpg

Afterwards I tried to remove the Keyring and as I already feared the filigree parts in the middle broke.

img_0.06588852236129883.jpg

Anyway I had prepared everything so I wanted to make the cast, to see a result, to make thing better next time.

I placed the Gas stove in my kitchen (the only room with stone floor) and started to melt the Zamak (Iam not sure if it's called like this in English it's a Zinc Alloy). 🔥

img_0.8426017693247674.jpg

I poured the liquid metal into the mold, than comes the most tense moment, the waiting till it cools down. 😬
Meanwhile the stench of burnt oil spread throughout the apartment 🛢️😷

After I while I opened the Molding Box and I was pretty happy with the result.
I have already an idea how I can optimise the Keyring to get a better cast.

Many thanks to all who have read so far, for comments I am always grateful.

Deutsch

Nach meinem Fehlschlag einen Formkasten zu bauen habe ich mir dann einfach einen bestellt, der ist vor ein paar Tagen angekommen.
Sonntag hatte ich dann Zeit meine erste Form vorzubereiten.

Ich wollte den Hive Logo Schlüsselanhänger gießen.
Ich hatte keine Lust das ganze Prozedere in einem dunklen kalten Keller durchzuführen....
Ich habe es dann in meiner Wohnung gemacht, was ich niemandem empfehlen möchte. 😅

Ich habe eine Folie über meinen Wohnzimmer Tisch gelegt und den Sand in die Boxen gefüllt. ⏳
Anschließend habe ich den Schlüsselanhängern dann aus dem Sand geholt und wie ich bereits davor befürchtet hatte brachen dabei die mittleren Teile, da sie einfach zu filigran waren.

Wie auch immer, ich hatte alles bereits vorbereitet und wollte den Guss jetzt wagen um zu sehen was man beim nächsten Mal besser machen könnte.

Ich brachte meinen Gaskocher in der Küche in Stellung (der einzige Raum mit Stein Boden) und ließ das Zamak schmelzen. 🔥
Ich goß das flüssige Metall in die Form, dann kommt der spannenste Moment, das Warten, bis alles abgekühlt ist. 😬

Währenddessen breitete sich der unwiderstehliche Duft von verbranntem Öl in der Wohnung aus 🛢️😷
Nach einiger Zeit habe ich dann die Form geöffnet und war ziemlich zufrieden mit dem Ergebnis.

Ich habe auch schon eine Idee, wie ich den Schlüsselanhänger ändern muss um ein besseren Guss zu erzeugen.

Vielen Dank an alle die bis hierher gelesen haben, für Anmerkungen bin ich immer dankbar.



0
0
0.000
19 comments
avatar

That looks like a fun DIY project. By the way, did you know about DIY communities on hive? I see that you even used the tag. So, just to let you know, based on OCD rules, try and submit your content to the more appropriate communities before OCD unless you feel it does not belong in any and is original content that works with our rules.

0
0
0.000
avatar

Thank you, I wasn't sure which community might be the best to publish my post...

0
0
0.000
avatar

No worries, I think DIY hive would suit it best. Plus if you use peakd.com you can still cross-post it.

0
0
0.000
avatar

Alright, thank you very much for the information sometimes Iam not too sure about the right community

0
0
0.000
avatar

Stark!

0
0
0.000
avatar

Danke, wenn alles optimal läuft (was in der Regel nicht der Fall ist) soll es die Schlüsselanhänger bald zu gewinnen geben 😉

0
0
0.000
avatar

Ein gewichtiger Schlüsselanhänger ist nicht so mein Ding, ich brauche es schlank/leicht. Aber verfolgen werde ich das auf jeden Fall!

0
0
0.000
avatar

Ja zu groß soll er nicht werden, zu klein ist aber auch schwierig 😬🔑

0
0
0.000
avatar

Sieht echt stark aus und eine tolle Idee.

LG Michael

!invest_vote

0
0
0.000
avatar

Aaaaahhhhh nice! Will auch eins, um dann so rumzurennen!!! xD ;D
!LUV !PIZZA !LOL
Rapper Chain 1.webp

0
0
0.000
avatar

In der ultra Xl Version 😂 wenn es irgendwann funktioniert sollen die verlost werden 😉 !BEER

0
0
0.000
avatar
(Edited)

Congratulations! You have been awarded with the European Hive Mechatronics Network Badge for your initiatives surrounding mechatronic art or anything related to circuits, robotics, electronics, computer science, telecommunications, systems, control, and product engineering. The European Hive Mechatronics Network Badge connects maker enthusiasts and 3d printers around Europe with the Hive Blockchain to create an efficient network for spare parts and fosters collaboration. Promoting a European Hive Mechatronics Network is an initiative that aims to create an efficient future supply chain using the hivewhat.com map and possibly a future cloud for uploading 3d scanned files. This can create a way to conveniently find the closest proximity to a decentralised spare part manufacturing unit in the network.

Mecha_hive_EU_small.png

You have been awarded the European Hive Mechatronics Network Badge
We’d like to give you a warm welcome to subscribe to the The Mind Force Gathering. Feel free follow us and delegate to our European Hive Mechatronics Network Badge Account .

10 HP20 HP30 HP100 HP250 HP500 HP1000 HP2000 HP5000 HP

0
0
0.000