Motorola E5 Play disassembly tutorial @josuerr29

avatar

▶️ Watch on 3Speak


PicsArt_05-03-09.32.09.jpg

Hello dear and beautiful geek zone community how are you? I am very well I am happy to come to bring another video and another content about How to disassemble a mobile device, one of my favorite content.

This type of content is my favorite because I love technology, I love to repair mobile devices, I love to repair computers, I love in general to work with electricity, and apart from this I am starting in programming and it is something that I like very much.

Introduction

Sometimes speaking as technicians we do not know how is the infrastructure of a mobile equipment inside and then when we go to disassemble it we do not know what we are going to face, where we have to be careful and what kind of movements to do, because sometimes we have disassembled equipment and without knowing how it is inside we simply damage it and then we have to go running to buy the components that we have already damaged to give the customer the good mobile equipment, fixing the damaged.

Also speaking as people that we simply have not disassembled any time a mobile equipment then here I bring you this video so you can learn the simple tools that you must have to be able to disassemble a mobile equipment does not require much It requires patience dedication and care and the tools that Comment on the video.

Tools:

  • A Phillips screwdriver.
  • A pair of pliers.
  • A slotted screwdriver.
  • A lot of patience.
  • A lot of care.

Process:

  1. Very carefully remove the back cover of the mobile equipment and the battery, you also remove the chip and the memory.
  2. With great care and having in hand the star screwdriver you are going to begin to remove all the screws. You must have a base below as a kind of foami so that the equipment does not scratch the screen.
  3. After removing all the screws with the paddle screwdriver and with a lot of patience you are going to lift the protective base of the plate which is part of the same casing, you have to be careful not to break the Flex of the volume of ignition or push the paddle screwdriver too much inwards because if you do it you can damage some internal component.
  4. Lift the casing of the equipment with care not to damage
  5. We observe each component the mobile equipment, there I show you Flex of screen, the camera, Flex of the fingerprint, the cable of the antenna.
  6. We have to begin to remove the screws to the plate are two screws so that the plate is fastened well and does not move.
  7. Lift the board carefully because under the board there is the Flex that goes directly to the charging pin board, so as not to damage it.
  8. Once the main board is disassembled, we must lift the part of the casing where the charging pin goes. This part of the equipment we lift it carefully with a paddle screwdriver.
  9. I show what is the antenna cable, the charging pin and the flex that goes to the main board, the motor tool that makes the mobile equipment vibrate.

Thank you all very much for watching the video I hope you like it.

content sources
  • Translation of the text: www.deepl.com
  • Photo and video: Picsart pro. YouCut. Samsung Galaxy j6 plus.
  • Source of authorship: own original
  • Gift creation: www.canva.com
  • Music of the video Copyright free: Here

Translated with www.DeepL.com/Translator (free version)


Hola querida y bella comunidad de geek zone cómo están? Yo estoy muy bien Estoy feliz por venir a traer otro vídeo y otro contenido acerca de Cómo se desarma un equipo móvil, de mis contenidos favoritos.

Este tipo de contenido es mi preferido ya que a mí me encanta la tecnología, me encanta reparar dispositivos móviles, me encanta reparar computadoras, me encanta en general trabajar con la electricidad, y aparte de esto estoy empezando en programación y es algo que me gusta mucho.

Introducción

A veces hablando como técnicos no sabemos cómo es la infraestructura de un equipo móvil por dentro y entonces cuándo vamos a desarmarlo no sabemos con qué nos vamos a enfrentar, a dónde tenemos que tener cuidado y qué tipo de movimientos hacer, porque en ocasiones hemos desarmado equipos y sin saber cómo es por dentro simplemente lo dañamos y luego tenemos que ir corriendo a comprar los componentes que ya hemos dañado para entregarle al cliente el equipo móvil bueno, arreglando lo dañado.

También hablando como personas que simplemente no hemos desarmado ninguna vez un equipo móvil entonces aquí te traigo este vídeo para que aprendas las simples herramientas que debe tener para poder desarmar un equipo móvil no se requiere de mucho Se requiere de paciencia dedicación y cuidado y las herramientas que Comenten el vídeo.

Herramientas:

  • Un destornillador de estrella.
  • Una pinza.
  • Un destornillador de paleta.
  • Mucha paciencia.
  • Mucho cuidado.

Proceso:

  1. Con mucho cuidado quitar la tapa trasera del equipo móvil y la batería, también le quitas el chip y la memoria
  2. Con mucho cuidado y teniendo en mano el destornillador de estrella vas a comenzar a retirar todos los tornillos Debes tener una base abajo como especie de foami para que el equipo no sé rayé por la pantalla
  3. Después de sacar todos los tornillos con el destornillador de paleta y con mucha paciencia vas levantando la base protectora de la placa qué es parte de la misma carcasa, tiene que tener cuidado de no romper el Flex del volumen de encendido ni empujar mucho el destornillador de paleta hacia adentro porque si lo haces puede dañar algún componente interno.
  4. Levantamos la carcasa del equipo con cuidado de no dañar
  5. Observamos cada componente el equipo móvil, allí te muestro Flex de pantalla, la cámara, Flex de la huella, el cable de la antena.
  6. Tenemos que comenzar a quitarle los tornillos a la placa son dos tornillos para que la placa se sujete bien y no se mueva
  7. Levantamos la placa con cuidado ya que debajo de la placa existe el Flex que va directamente a la placa del pin de carga, para no dañarlo.
  8. Ya desarmada la placa principal debemos irnos a levantar la parte de la carcasa Dónde va el pin de carga. Esta parte del equipo la levantamos con cuidado con un destornillador de paleta.
  9. Demuestro Cuál es el el cable de la antena el pin de carga y el flex que va a la placa principal, el motor tool que hace vibrar el equipo móvil.

Ha todos muchachos Muchas gracias por ver el vídeo espero les guste

fuentes del contenido
  • Traducción del texto: www.deepl.com
  • Foto y video: Picsart pro. YouCut. Samsung Galaxy j6 plus.
  • Fuente de Autoría: original propio
  • Creación de gift: www.canva.com
  • Musica del video Sin derecho de autor: Aqui

@josuerr29.gif


▶️ 3Speak



0
0
0.000
1 comments
avatar

Whoever is directly controlling the V2K told me to kill myself.
They told me if I killed myself now it would save the lives of countless others.
Saying the longer I wait to kill myself the more people will suffer.


They are reckless and should have shown the proper media what they had before taking me hostage for 5 years. I know there are many in prison that dont deserve to be there because of this. Your stay in prison will not be fun @battleaxe and friends. People are going to want you dead when they find out what you did. I hope you die a slow painful death. You sick mother fuckers.

https://peakd.com/gangstalking/@acousticpulses/electronic-terrorism-and-gaslighting--if-you-downvote-this-post-you-are-part-of-the-problem

Its a terrorist act on American soil while some say its not real or Im a mental case. Many know its real. This is an ignored detrimental to humanity domestic and foreign threat. Ask informed soldiers in the American military what their oath is and tell them about the day you asked me why. Nobody has I guess. Maybe someone told ill informed soldiers they cant protect America from military leaders in control with ill intent. How do we protect locked up soldiers from telling the truth?
0
0
0.000