How to UNBRICK your Vivo Y53 Android Smartphone

avatar
(Edited)

PicsArt_061008.09.20.jpg

Problem

  • Hang on Logo
  • Update Error
  • Auto Restart
Arrive this morning on my shop, customer problem the phone is hang on logo only, i check it and talk to the customer to sit or walk for a while because it takes 15mins to 30mins to be done, this method can solve the following software problem only half soft brick, hang on logo, update error, auto restart, commonly solve thru flashing.

The Vivo y53 processor is a QUALCOMM CHIPSET cant be flash on ordinary usb connection, we have to open it and put it on to EDL mode (Emergency Download) it is a Qualcomm feature that can allow you to perform tasks like unbricking or flashing your devices. do not try this to any other model, Note: this procedure will work only to Vivo Y53.

Tools Needed

  • Tweezer
  • Screw ★ 0.8
  • Screw + 1.5
  • Plastic picks
  • Sim Card ejector
  • Usb Charging and Data Cable
  • Laptop
  • Qualcomm Flash Image Loader v2.0.0.2
  • Vivo Y53 Firmware

Procedure

1. Remove the sim tray by the sim card ejector tool, then fully turn off your phone.

IMG_20200608_135051.jpg

2. Remove the two screws at the bottom by Screw ★ 0.8 tool.

IMG_20200608_134840d.jpg

3. Carefuly remove the back cover using the plastic pick tool.

IMG_20200608_135242.jpg

4. After dissassembly we can now proceed to flashing.

IMG_20200608_135338.jpg


Flashing

1. Download the Qualcomm Flash Image Loader v2.0.0.2 QFIL then extract.

2. Download the Vivo Y53 Firmware then extract

3. Open the QFIL software check the Flat Build.

zsdsddsa.jpg

4. Load the Vivo Firmware, Select Browse go to your vivo firmware extracted path.

zsdsdsasas.jpg

5. Select this filename "prog_emmc_firehose_8917_ddr.mbn" to your vivo firmware extracted path.

prog.jpg

6. Load XML to your vivo firmware extracted path.

zsdsdsasasasa.jpg

7. Select this filename "rawprogram_unsparse" to your vivo firmware extracted path.

dfdf.jpg

8. there will be another popup select the filename "patch0".

pfg.jpg

EDL Mode

9. Before we proceed to flashing we have to put the phone into testpoint to activate the EDL mode by connecting those two dots.

IMG_20200608_135601fd.jpg

10. Make sure you have a Qualcomm driver installed to your computer, google it, use the tweezer to connect the two dots, then while holding those testpoint, connect the USB cable to your phone and to the computer, to know that it is connected you will hear a beep sound, then remove the tweezer to the two dots to begin flashing.

IMG_20200608_135626d.jpg

11. Lets go back to the QFIL and click dowload, you will see a blue gauge in progress to the status bar, wait untill it reach to the end then your done.

zsdsdsasasasaasasa.jpg

12. Remove the USB Cable and assemble the phone then boot it up, NOTE: all data stored and downloaded apps that previously installed will be erased.

IMG_20200608_141058.jpg

WARNING: This is done by a technician, i am not responsible to any damage of your device if there is a hidden defect prior to the software problem.

____

Stay Tuned
@dashand



0
0
0.000
6 comments
avatar

Congratulations @dashand! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 4500 upvotes. Your next target is to reach 4750 upvotes.

You can view your badges on your board And compare to others on the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

0
0
0.000
avatar

Bro. Magkakaproblema ba pag iunroot ang phone?😁

0
0
0.000
avatar

mas ok ung unroot po, mas delekado pag naka root kasi may access sa system

0
0
0.000