Computer Aided Design Computer-aided manufacturing

CAD CAM
PLTD APUNG

Computer Aided Three-dimensional Interactive Application. CATIA software CAD/CAM/CAE
Modeling 3-D Floating Power Plant with CATIA V5R16
Modeling 3-D Floating Power Plant with CATIA V5R16 software
Modeling of wind turbine blades is done in a workbech part design that is by drawing parts of the floating power plant; Furthermore, the parts are combined into a series.
The first time you run the CATIA V5R16 software, an Initial Screen will appear. Before entering the Design Workbench Part the screen is first cleared. As shown in the picture Screen CATIA V5R16

Part design is the first step in modeling using CATIA V5R16 software. This workbench is used to draw a Floating PLATD. This workbench can be accessed by clicking Start → Mechanical Design → Part Design.

After performing the steps above, a dialog box will appear. Part names can be written in the "Enter part name" text box after that, click "Ok". The display will appear as shown below:

Select then click the sketch icon and exit the workbench

Then click the icon to pad 1.9 cm wide, then click OK

Then click the icon for the floating PLTD pad cabin

Next we enter again into the sketch icon to draw a floating chimney of the PLTD ship that we have to sketch is a circle

Click the pad icon to bring up the chimney

The final result of a sketch of a floating PLTD ship