Elektronikprojekt Teil 6 / Electronics project part 6

avatar

Hallo Elektronikfreunde.

Nun fehlt noch das DSP5015 Modul

DSP5015 2.jpg

Bild 01 zeigt das Modul in der Originalverpackung.

DSP5015 Join7_LI.jpg

Bild 02
Gut zu erkennen die Shunt-Widerstände (3 Drahtbrücken links im Bild).

DSP5015 7.jpg

Bild 03

Leider passen die Befestigungen des Modules nicht in das Raster des Gehäuses. Deshalb musste ich eine Adapterplatine zur Aufnahme das Leiterplattenmodules anfertigen

DSP5015 11.jpg

Bild 04 zeigt, wie das Ganze im Gehäuse seinen Platz findet.

20200122 19.07.24_2.jpg

Bild 05
Zwischen den Anschlüssen befinden sich SMD Sicherungen. Im Bild 05 zu sehen die Out-Anschlüsse und dazwischen, die Sicherung mit F2 bezeichnet. Der Wert ist 20A.

DSP5015 4_LI.jpg

Bild 06
Auf der In-Seite befindet sich F3 mit ebenfalls 20A. Diese sind also bei einem Gerätedefekt ebenfalls zu kontrollieren und gegebenenfalls auszutauschen.

20200122 19.50.36.jpg

Bild 07: Ein erster Funktionstest mit 2 Lampen als Last

20200122 19.56.55.jpg

Bild 08 der Belastungstest mit 100Watt (ca.6Ampere)
Nun kann das Modul eingebaut werden, um dann die Endmontage und den finalen Belastungstest durchzuführen.

Fortsetzung folgt …….

google translator

Hello electronics enthusiasts.

Now the DSP5015 module is still missing

DSP5015 2.jpg

Fig. 01 shows the module in the original packaging.

DSP5015 Join7_LI.jpg

Picture 02
The shunt resistors are clearly visible (3 wire jumpers on the left in the picture).

DSP5015 7.jpg

Image 03

Unfortunately, the attachments of the module do not fit into the grid of the housing. So I had to make an adapter board to accommodate the PCB module

DSP5015 11.jpg

Fig. 04 shows how everything fits into the housing.

20200122 19.07.24_2.jpg

Picture 05
There are SMD fuses between the connections. In picture 05 you can see the out connections and in between, the fuse labeled F2. The value is 20A.

DSP5015 4_LI.jpg

Image 06
On the In side there is F3 with 20A as well. In the event of a device defect, these should also be checked and replaced if necessary.

20200122 19.50.36.jpg

Fig. 07: A first function test with 2 lamps as a load

20200122 19.56.55.jpg

Fig. 08 the load test with 100 watts (approx. 6 amps)
Now the module can be installed in order to carry out the final assembly and the final load test.

Sequel follows …….



0
0
0.000
2 comments
avatar

According to the Bible, Why was Jesus Christ baptized despite being sinless? (Part 2 of 2)

(Sorry for sending this comment. We are not looking for our self profit, our intentions is to preach the words of God in any means possible.)



Comment what you understand of our Youtube Video to receive our full votes. We have 30,000 #SteemPower. It's our little way to Thank you, our beloved friend.
Check our Discord Chat
Join our Official Community: https://beta.steemit.com/trending/hive-182074

0
0
0.000
avatar

Steem on und weiter viel Erfolg...

Du hast ein kleines Upvote vom German-Steem-Bootcamp erhalten.

Du findest uns im Discord unter https://discord.gg/HVh2X9B

Aktueller Kurator ist @don-thomas

DONNERSTAGS findet bei uns ab 19 Uhr die Quasselstunde(n) statt wo du nicht nur mit uns reden kannst - es werden auch tolle Preise verlost
Du möchtest keine Upvotes (mehr) von uns erhalten? Eine kurze Mittelung unter diesen Kommentar reicht.
Dem Upvote von uns folgt ein Trail der weitere Upvotes von unseren Unterstützern beinhaltet. Hier kannst du sehen wer diese sind und auch erfahren wie auch du uns und somit die deutschsprachige Community unterstützen kannst.
0
0
0.000