STEM Class

avatar
(Edited)

img_0.9058800863918294.jpg

STEM or what is Science, Technology, Engineering and Mathematics is an Educational field focusing on those four subject matters in a real world applicable style. It's also a style I excelled in as a kid but it wasn't really called STEM back then I don't think. I think STEM in its Educational sense is a relatively new concept. Literacy and numeracy is the main focus of the current education frame work A.K.A boring.

I was always able to quickly grasp concepts and run with them something I still do. Lil Miss being my daughter I thought I would give it a crack.

img_0.46493325495299287.jpg

Before lockdown I promised Lil Miss I would build her a scooter ramp and unfortunately due to lockdown 6.0b local hardware stores have only been open to trades. We did however, have an abundance of cardboard from all the credit card purchases going on. So we decided to undertake our biggest arts and crafts project yet.

img_0.1234953236066998.jpg

With nothing but a ruler, texta, box cutter, glue, duct tape (you can do anything with duct tape) and out excess cardboard we decided to get to work designing, measuring and creating our very own cardboard scooter ramp.

Through the process I explained to Lil miss weight ratio and even how in the designing process we needed to reinforce the structure so it would take her weight, be fit for purpose as well as stable.

img_0.7483988482932038.jpg

We got to designing our ramp and what she wanted in it she wanted a really really big one. But as we tested our cardboard against a 25kg weight plate it didn't hold to well and the rolling motion often caused it to buckle.

img_0.4062714349015191.jpg

To increase its resistance and weight bearing ability we made three ramp cut outs one for each side and one through the middle. We also reinforced it be gluing another one to each one. So each side and middle is two cardboard cut outs.

img_0.9021621348093726.jpg

We piled them ontop of each other, added some weight and let it sit over night for our super glue to take hold. As this was our frame it was vital that it had enough time to dry and the cardboard didn't become compromised and crushed.

img_0.6301986768324449.jpg

I also did this with 3 additional pieces that would form the rest of the structures frame. We then marked out slits in the cardboard so it would all slot together like a jigsaw puzzle. Careful not to cut too far in that it compromised the structure.

img_0.04205753470386204.jpg

The next day we assembled the pieces and this is what we had. The bear bones of the cardboard ramp. To test it I placed another cardboard piece flat on top to cover the holes and asked little miss to get ontop and jump a little. It held and no children were harmed in the construction.

img_0.45357753301723003.jpg

For the ramp section itself being thinner I didn't have the same luxury of cutting slits into it and sliding more cardboard into it as it would have compromised the strength and weight bearing capacity. So instead we utilised the pieces of MDF that came with our treadmill box as three slats across the top. Light enough to not add too much weight and strong enough to hold little misses weight and any added weight. As this is the part of the ramp that will be the most used and under pressure due to the constant movement. I also believe I will need to replace the piece of cardboard more often that will be going over the top.

We further reinforced the weight bearing capacity by gluing and duct taping more MDF to the sides of the cardboard. It's at the location that little miss will be entering the ramp so there will be periods of taking a fair bit of load and needs to be strengthened.

img_0.1249770791793744.jpg

Now that our sturdy frame was complete it was time to seal it all up with more double glued cardboard for added strength.

img_0.8461712090017146.jpg

Before using the scooter it was time to put it to the test and little miss went to town on it using it as a massive slide. She's so excited and can't wait to show her little brother tomorrow who will love using it as a slide to.

I was surprised at how sturdy it was and using only a box cutter we managed to come out with a pretty straight and well balanced ramp.

img_0.23638980994492423.jpg

Little miss enjoyed her new ramp for abit longer while I cleaned up the garage and let the quick dry glue set, I reinforced it in position with duct tape and now it was time for the real test. The Scooter.

img_0.9058800863918294.jpg

It was a fantastic success able to take her weight and the reinforced cardboard had no issue from the wheels of the scooter. The slates across the ramp of MDF provide the perfect amount of weight bearing and distanced enough that the cardboard doesn't wear too fast in the parts where no MDF is. I do however, believe this is where it will fail first but we will see it happening.

A wonderful STEM class where we were able to learn and build something at the same time. If you don't already know there is a STEMGeeks community on Hive with a STEMGeeks token. As many of the Educational topics blogged about here relate to STEM fields I thought it would be good to let you all know about it.

Hope you enjoyed today's class and we've inspired you to put that cardboard building up in the shed to good use.

Have a great day/night!



0
0
0.000
9 comments
avatar

This platform is educative platform and i wish people can come and learn most time. But the truth is that many are yet to realise the importance of this tribe and that is what contributed to the minimal performance of people on this platform.

0
0
0.000
avatar

You remind me so much of my eldest. Her love is science (and maths, but not so much English), yet even when she did the STAT to access university for a science degree there was only a small component of science and the rest was maths, English and more English. She got full marks in the maths and science, but English pulled her down a little. Still, not bad, in the top 15% in all.

I love the physics learning in this build to increase the strength. Did she seem to understand the concepts?

0
0
0.000
avatar

It was a learning curve and I think she got a hold of why we were doubling up on cardboard to make it stronger. It was a great project and as we did some each day she wanted me to work through the night to complete it in one go 🤣

0
0
0.000
avatar

a great project indeed - up!

0
0
0.000
avatar

This is just one of the memory bringing back content,I can't forget my love for technology while I was growing up , making different type of things like car's,kit and lot more with cartons too and today life as not really pushed me in that way,bug of all,I can't still very much say that am doing very well often daily and that is why my love for science too can't be taken away or permit me to say that technology is life take it or leave it,it is the best way to move the world 🌎 at large forward, irrespective of happenings and am very delighted to be back to this community once again,after been out for a very long time due to illness

0
0
0.000
avatar

STEMGeeks is an awesome community on the hive and I am a big-time technology lover so I check out a couple of STEM posts every day and it helps to explore much more of the technology and many other kinds of stuff. Nice use of cardboard to make this ramp for her. nice

0
0
0.000
avatar

How awesome I love how much fun your daughter is having with that platform, plus it's a beautiful father/daughter project and those create the best memories. Congratulations

0
0
0.000