Densidad aparente del suelo/ Parte I /Recolección de sub-muestra por el método de excavación// Apparent Soil Density / Part I / Sub-Sample Collection by Excavation Method

5f59988775924758075522.gif

¡Saludos amigos de la plataforma Hive!


Ver en Youtube por @sandracarrascal

En especial un caluroso y respetuoso saludo a la comunidad de estem –espanol y stem-social, en esta oportunidad quiero compartir con ustedes una practica de campo realizada en el arboreto de la Universidad Experimental Sur del Lago Jesús Maria Semprun (UNESUR) que lleva por nombre “Determinación de la densidad aparente del suelo”.

La densidad aparente del suelo es una propiedad física del recurso suelo, que esta estrechamente relacionada con el grado de compactación del mismo, estas características del grado de compactación afectan directamente a las funciones del sistema radicular de las plantas, al igual que afecta el porcentaje de porosidad logrando que los suelos lleguen hacer impermeables , impidiendo el equilibrio entre agua y el oxígeno, de igual manera afecta la actividad de los microorganismos en el suelo.

Al momento de dirigirnos al campo a realizar esta práctica donde vamos a evaluar por medio de un método de hoyo o excavación, se van a utilizar los siguientes recursos.

  • Pala.

  • Agua.

  • Balde.

  • Cilindro graduado de 1000.mm.

  • Bolsa negra.

Procedimiento

Primero vamos a cavar un hoyo de 20 cm por 20 cm por el método de hoyo o excavación extraemos una sub-muestra donde vamos agrega el material solido en el balde, y vamos apreciar las sub-muestras de suelo húmedo, esta muestra se va llevar al laboratorio donde vamos a pesar 200gr de la misma para hacer llevado hacia la estufa para que en el momento de tener esta muestra en la estufa lo vamos a dejar por un lapso determinado de 120 minutos y con una temperatura a 105ºc grados centígrados para que el mismo se seque y tomar una muestra de suelo seco.

Colocamos el plástico en el hoyo cavado y le colocamos agua con el tubo cilíndrico para determinar el volumen total del suelo determinamos que cantidad de agua necesitamos, en total se gastaron 8 litros de agua, hay vamos a determinar el peso y el volumen total del suelo.

Conclusión

Podemos concluir que la densidad aparente del suelo nos ayuda a determinar el grado de compactación del mismo, identificar las propiedades que pueden ser cambiadas de acuerdo al manejo que se esté dando al suelo, al aplicar el método del hoyo o excavación del suelo el cual es método muy sencillo y al mismo tiempo practico el cual podemos determinar la densidad aparente del suelo, el porcentaje de humedad que nos va a reflejar, y las características texturales del suelo.

Referencias recomendadas

DENSIDAD APARENTE

La densidad aparente y sus implicaciones agrícolas en el proceso expansión/contracción del suelo

Densidad aparente


5f59988775924758075522.gif

English

Greetings friends of the Hive platform!


Ver en Youtube por @sandracarrascal

Especially a warm and respectful greeting to the community of estem - Spanish and stem-social, in this opportunity I want to share with you a field practice carried out in the arboretum of the Universidad Experimental Sur del Lago Jesús Maria Semprun (UNESUR) called "Determination of the apparent density of the soil".

The apparent density of the soil is a physical property of the soil resource, which is closely related to the degree of compaction of the same, these characteristics of the degree of compaction directly affect the functions of the root system of plants, as well as affecting the percentage of porosity making the soil become impermeable, preventing the balance between water and oxygen, likewise affects the activity of microorganisms in the soil.

When we go to the field to perform this practice where we are going to evaluate by means of a hole or excavation method, we are going to use the following resources

  • Shovel.

  • Water.

  • Bucket.

  • Graduated cylinder of 1000.mm.

  • Black bag.

Procedure

First we are going to dig a hole of 20 cm by 20 cm by the method of hole or excavation we extract a sub-sample where we are going to add the solid material in the bucket, and we are going to appreciate the sub-samples of humid ground, this sample is going to be taken to the laboratory where we are going to weigh 200gr of the same one to make taken towards the stove so that at the moment of having this sample in the stove we are going to leave it by a determined lapse of 120 minutes and with a temperature to 105ºc degrees centigrade so that the same one dries and to take a sample of dry ground.

We put the plastic in the dug hole and we put water with the cylindrical tube to determine the total volume of the soil. We determine how much water we need, in total 8 liters of water were spent, there we will determine the weight and total volume of the soil.

Conclusion

We can conclude that the apparent density of the soil helps us to determine the degree of compaction of the same, identify the properties that can be changed according to the management that is being given to the soil, by applying the method of the hole or excavation of the soil which is very simple and at the same time practical method which we can determine the apparent density of the soil, the percentage of moisture that will reflect us, and the textural characteristics of the soil.

Recommended references

APPEARING DENSITY

La densidad aparente y sus implicaciones agrícolas en el proceso expansión/contracción del suelo

Apparent Density



0
0
0.000
9 comments
avatar

Esta publicación ha sido valorada por la comunidad @hivemexico.

Hive México es la unión de comunidades hispanas, que se enfoca en la orientación y educación, ademas de promover diversas actividades para usuarios no solamente mexicanos.
Curador: @Mariale07

X37EMQ9WSwsLaUVnWj5uXRHwjwzR6KfScsHyS24twkWHXTmg7HHYV2YyBMMSNhWYt8Y1gqUrh4yKCdjGhHDzC78gwB4wS3tPVHdMG.png

Te invitamos a visitar nuestro servidor en Discord

0
0
0.000
avatar

Thanks for your contribution to the STEMsocial community. Feel free to join us on discord to get to know the rest of us!

Please consider supporting our funding proposal, approving our witness (@stem.witness) or delegating to the @stemsocial account (for some ROI).

Thanks for using the STEMsocial app and including @stemsocial as a beneficiary, which give you stronger support. 
 

0
0
0.000
avatar

Gracias por poder seguir contando con su valioso apoyo. Saludos

0
0
0.000
avatar

Congratulations @sandracarrascal! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 20000 upvotes. Your next target is to reach 25000 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000