Circuito con solo resistencia Óhmica // Circuit with ohmic resistance only

avatar
(Edited)


Saludos compañeros de la comunidad, bienvenidos de nuevo a mi blog, donde podrán encontrar contenido del amplio universo de la ciencia, las matemáticas, la biología, la física, la química, la filosofía y el conocimiento general acompañado de la divulgación científica, un saludo especial a las comunidades que estimula el contenido de la ciencia.

1612288341827.png


Introducción


Continuando el contenido de la ciencia al nivel de la física, en referencia con el tema de corriente alterna, donde pues aparece una fuerza sobre ella debido al campo donde se ubica, para el caso de la corriente eléctrica alterna esta se basa en la magnitud y el sentido varían cíclicamente, lo importante de este tipo de corriente variante es que se puede trabajar bajo un sistemas de corriente, el cual se pueden usar transformadores para cambiar la corriente de baja a alta tensión y viceversa, es por ello que en la actualida hay alta tensión, de consumo doméstico e industrial. Para el caso de circuito con sola resistencia Óhmica se evidencia que ocurre un fenómeno físico eléctrico, donde se desprecia la autoeducación eléctrica y su frecuencia de capacidad de su resistencia interna.

1612287120323.png


Lo singular de conocer este tipo de circuito tan sencillos es que se basa en la la ley de Ohm, resistencia eléctrica a la oposición al flujo de corriente eléctrica a través de un conductor, ya que nos muestra amigo lector que establece la relación que guardan la tensión y la corriente que circulan por una resistencia, también la forma triangular de mostrar relación entre intensidad y tensión en un conductor:


V = I.R, R la resistencia en Ohmios, la tensión V en voltios, I la corriente en amperios es por ello que se dice la triangulo de esta ley.


para nuestro análisis de hoy se desprecia la resistencia interna de un generador, el actual amigo lector se aplica la ley de Ohn y la valor máximo donde:


v = Vm. senᦍ. t y ɛ = ɛ. senᦍ. t


Tenemos que: i= v/R = V/R .senᦍ. t, donde V/R=I los valores máximo de v e I.alcanza estos valores y nulos en el mismo instante de tiempo en la fase del circuito. Recordemos lo siguiente tan solo la intensidad (corriente), que circula por un conductor es directamente proporcional a la diferencia de potencial, el cual este existe entre sus extremos e inversamente proporcional a su resistencia eléctrica, lo interesante como este simple circuito bajo el esquema de con sólo resistencia Óhmica, nos muestra claramente la intensidad de la corriente como esta circula entre dos puntos de un circuito eléctrico, que a su vez amigo lector o amante devla ciencia radica que es proporcional a la tensión eléctrica entre dichos puntos e inversamente proporcional a la resistencia, es por es ello que desprecia la autoinducción por que se da el caso de la constante es la conductancia eléctrica, donde se evidencia que es el inverso de la resistencia eléctrica.


En una corriente alterna los valores de la f.em. y de la intensidad esta va variar de forma instantánea, dando origen a valores promedios en un periodo completo esto son nulos, igual se pueden encender una bombilla, por que las magnitudes son también instantáneas al atravesar sierra resistencia.

1612287557145.png


Nos queda para un trabajo producidos W = R. I²e. T, que luego según la variación de l circuito este nos puede mostrar la diferencia de potencial, por los valores máximo de la ley Ohm V = I.R, es donde se puede dar a conocer como se comporta la tensión alterna que puede oscilar entre 125 a 220 voltios su valores de intensidad eficaces en amperios, Gracias a varios estudio y experimentos basado en este contexto nos permite conocer como podría ser los consumos o las pérdidas eléctricas en los tendidos eléctricos de los hogares, alta tensión, industrial, con el objetivo fundamental de lograr nuevo parámetro como es la potencia eléctrica.


☆☆☆☆☆☆☆☆☆☆☆

Circuit with ohmic resistance only


Greetings fellow community members, welcome back to my blog, where you can find content from the wide universe of science, mathematics, biology, physics, chemistry, philosophy and general knowledge accompanied by scientific dissemination, a special greeting to the communities that stimulates the content of science.


Introduction.


Continuing the science content to the level of physics, in reference with the topic of alternating current, where as it appears a force on it due to the field where it is located, for the case of alternating electric current this is based on the magnitude and sense vary cyclically, the important thing about this type of variant current is that you can work under a current systems, which transformers can be used to change the current from low to high voltage and vice versa, which is why in the actualida there is high voltage, domestic and industrial consumption. For the case of circuit with only Ohmic resistance it is evident that an electrical physical phenomenon occurs, where electrical self-education is disregarded and its capacity frequency of its internal resistance.


The sigulor of knowing this type of circuit so simple is that it is based on Ohm's law, electrical resistance to opposition to the flow of electric current through a conductor, as it shows us reader friend that establishes the relationship that keep the voltage and current flowing through a resistor, also the triangular shape of showing relationship between intensity and voltage in a conductor:


V = I.R, R the resistance in Ohms, the voltage V in volts, I the current in amperes is why it is said the triangle of this law.


for our analysis today we disregard the internal resistance of a generator, the current reader friend we apply Ohn's law and the maximum value where:


v = Vm. sinᦍ. t and ɛ = ɛ. sinᦍ. t


We have that: i= v/R = V/R .senᦍ. t, where V/R=I the maximum values of v and I.reaches these values and null at the same instant of time in the phase of the circuit. Recall the following just the intensity (current), which flows through a conductor is directly proportional to the potential difference, which this exists between its ends and inversely proportional to its electrical resistance, the interesting thing as this simple circuit under the scheme of with only Ohmic resistance, clearly shows us the intensity of the current as this circulates between two points of an electrical circuit, that in turn reader friend or lover devla science lies that it is proportional to the electrical voltage between these points and inversely proportional to the resistance, it is for it is it that disregards the self-induction because it is given the case of the constant is the electrical conductance, where it is evident that it is the inverse of the electrical resistance.


In an alternating current the values of the f.em. and of the intensity this is going to vary of instantaneous form, giving origin to average values in a complete period this are null, equal they can ignite a light bulb, for that the magnitudes are also instantaneous when crossing saw resistance.


We are left for a work produced W = R. I²e. T, that then according to the variation of l circuit this one can show us the difference of potential, by the maximum values of the law Ohm V = I.R, is where it can be given to know how the alternating tension behaves that can oscillate between 125 to 220 volts its values of effective intensity in amperes, Thanks to several study and experiments based on this context allows us to know as it could be the consumptions or the electrical losses in the electrical lines of the homes, high tension, industrial, with the fundamental objective to achieve new parameter as it is the electrical power.


[1]-Corriente Alterna Monofásica y Trifásica: Fundamentos de electrotecnia para ...por José Miguel Molina Martínez, Francisco Javier Cánovas Rodríguez, Francisco Asís Ruz Vila, 2011.


Fuente de imagen torsión de balance Ohms usada en el video


20191017_203627.gif


▶️ DTube
▶️ IPFS


0
0
0.000
0 comments