Energy Consumption Strategies in Urban Buildings Architecture and Design

in Architecture+Design5 months ago

39984857923_511bc3db89_b.jpg

Image showing a traditional mud house in the middle of modern mud houses. source from Eric Lafforgue via Flickr

The ever increasing rate of settlements in the urban areas has resulted to an ongoing removal of both vegetation and land cover in order to give room for expansion that will be enough to cater for this increase. However, this removal of both vegetation and land cover to give room for artificial surfaces usually results in higher heat retention during the summer and days with intense sunshine, thereby leading to increased energy use in these areas.

There are numerous factors contributing to elevated energy use, such as household size, population age, infrastructure, pattern of urbanization, the amount of energy require to cool a building due to rise in air temperature in urban areas as against rural areas and that is refer to as Urban Heat Island (UHI).

qjrE4yyfw5pJD9LKQ1BG3NbSyKTowh8wnMyt99dddua4U41rZmpEeZf2o8BwWGgNBRCrCf9Rmzna4biVLCpU9f9uPbkBv73RzRynuaVKDqeD3ohUhbFD1znr.png

A lot of strategies have been targeted towards reducing this energy consumption in the buildings and one of them is building envelope which include the process of enhancing wall insulation, roof insulation and window glazing as measures to tackle the high energy consumption in Urban Heat Island.

Wall insulation

Among the three mentioned strategies under building envelope, wall insulation has been proven to show high rate of cooling energy consumption in buildings, designing external wall of a building with mud materials have shown high performance overtime due to the natural cooling effect of the mud, in fact, most of the people are now adopting mud as building materials for various buildings, it is efficient, less costly and high performance when it comes to building low energy buildings. A typical example of the modern mud houses are shown below

SnapCrab_NoName_2021-12-13_17-14-58_No-00.png

A typical example of modern Fence Barrier Brick Tile Clay Brick House. Image from Pixabay

factory-2529579_640.jpg

Factory building brick red terrain. Image from Pixabay

qjrE4yyfw5pJD9LKQ1BG3NbSyKTowh8wnMyt99dddua4U41rZmpEeZf2o8BwWGgNBRCrCf9Rmzna4biVLCpU9f9uPbkBv73RzRynuaVKDqeD3ohUhbFD1znr.png

Roof insulation

Roof insulation is the second strategies to mitigate energy consumption in housing envelope, some of the best roof insulation materials that has been proved to save both money and energy consumption when adopted are: Spray foam insulation, Rigid insulation boards, Batt insulation, Loose-fill or blown-in insulation, and Structural insulated panels.

insulation-2389795_1280.jpg

A typical example of Spray foam insulation to mitigate energy consumption in a building . Image from Pixabay

Spray foam insulation as shown in the above is one of the strategies to mitigate energy consumption in a building, it works by spraying the foam to the underside of a building roof deck, just directly onto the tiles and slate. Of course, it forms a strong cohesive bond between the slates and the tiles in order to reduce unwanted heat, cool air from seeping in, wind, and moisture.

5090356047_b7d80cea06_b.jpg

Atypical example of Rigid foam insulation. Image from Ryo Chijiiwa via Flickr

The R-5 polyiso insulation boards shown above has a shiny side which help to reflect radiant heat, though this type costs more than the other two main types but it returns the highest R-value. Other two main types are extruded polystyrene (XPS), and expanded polystyrene (EPS).

qjrE4yyfw5pJD9LKQ1BG3NbSyKTowh8wnMyt99dddua4U41rZmpEeZf2o8BwWGgNBRCrCf9Rmzna4biVLCpU9f9uPbkBv73RzRynuaVKDqeD3ohUhbFD1znr.png

Window glazing design

When it comes to building low energy consumption, nowadays, designers also consider external window design and glazing. Use of large glazing windows are common in modern buildings, especially skyscraper, since it results in high rate of heat transfer and since window also allow daylight into a building, thereby providing sufficient lighting during the day and meeting at least some of lighting needs in internal spaces.

glass-front-2276515_960_720.jpg

A typical example of Glass Front Reflection Modern Architecture Facade. Image from Pixabay

glass-facade-2512525_960_720.jpg

Glass Facade Modern Architecture Construction Site. Image from Pixabay

Conclussion!

Nowadays, it has gone beyound just building a house, but a lot of things such as energy consumption strategies as being discussed here must be considered during the architecture design of buildings and no doubt, envelope building (wall insulation, roof insulation and window glazing design) is one of the best strategies to mitigate energy consumption in our buildings.

Thanks for stopping by and I hope this will be of help to both architectural designers, contractors, the building owners, respected students of knowledge out there, and the community at large.

I appreciate your kind gesture always!

References

  1. Zhu, L. et al. (2009) ‘Detailed energy saving performance analyses on thermal mass walls demonstrated in a zero energy house’, Energy and Buildings, 41(3), pp. 303–310. doi: 10.1016/j.enbuild.2008.10.003.

  2. 5 best roof insulation options that will save money and energy

  3. What insulating materials are suitable for roof insulation?

  4. Alaidroos, A. and Krarti, M. (2015) ‘Optimal design of residential building envelope systems in the Kingdom of Saudi Arabia’, Energy and Buildings, 86, pp. 104–117. doi: 10.1016/j.enbuild.2014.09.083.

Sort:  

Glass designs on buildings is a double edge sword. We can have good lighting but high heat transfer can cause air-condition cost. At the end of the day, design must balance between function, aesthetics and sustainability. !discovery 20

That's the fact we cannot run away from. Thanks @juecoree for your contributions. I appreciate!

Congratulations @noble-noah! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You published more than 150 posts.
Your next target is to reach 200 posts.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

Support the HiveBuzz project. Vote for our proposal!

Your content has been voted as a part of Encouragement program. Keep up the good work!

Use Ecency daily to boost your growth on platform!

Support Ecency
Vote for new Proposal
Delegate HP and earn more

Would the amount of greenery and landscaping placed around a building have an impact? According to a newscast I watched the other day they were talking about placing more green space in cities to help decrease the temperatures in some cities.

Yes, an effort to mitigate everyday increase in air temperatures within urban cities started with the adoption of the greenery i.e trees and urban gardens being planted within the cities. Of course, a lot of benefits were achieved. However, research has shown that the energy require to cool a building in urban cities is higher than that which is required to cool a similar building in the rural environment.

Greenery also has less effect on direct radiation since evapotranspiration consequence of greenery is at ground level.

@joerhino I'm glad to read from your end, how is your health?

Thanks for the detailed response and explanation. I have always been amazed by the big temperature difference when I leave urban areas for rural areas in the summertime.

I am on the mend, getting better every day! Thank you for asking.


This post was shared and voted inside the discord by the curators team of discovery-it
Join our community! hive-193212
Discovery-it is also a Witness, vote for us here
Delegate to us for passive income. Check our 80% fee-back Program