Aprendiendo a Reparar Mi Pc #02 – Fuente de Poder. / Learning to Repair My Pc # 02 - Power Source.

¡Hola amigos de la colmena!… Hoy aprenderemos lo necesario sobre la fuente de alimentación o fuente de poder; en la publicación anterior les mencione que mi Pc se había dañado y aprendería a repararla.

Antes de destapar la computadora debemos asegurarnos de que la falla no se externa es decir del tomacorriente o cualquier dispositivo entre él y la Pc; como por ejemplo: Regulador, UPS o hasta el mismo cable, algo muy poco probable es que el cable de alimentación este mal conectado pero puede pasar. Una vez realmente seguros de que la falla está en la Pc, podemos comenzar a chequearla.

Hello friends of the hive! ... Today we will learn what is necessary about the power supply or power source; in the previous post I mentioned that my PC had been damaged and I would learn how to repair it.

Before uncovering the computer, we must make sure that the fault is not external, that is, to the electrical outlet or any device between it and the PC; such as: Regulator, UPS or even the cable itself, something very unlikely is that the power cable is badly connected but it can happen. Once we are really sure that the fault is in the PC, we can begin to check it.

IMG_20201002_144202.jpg

Definición UPS: “Uninterruptible Power Supplies” Lo que significa Sistema de alimentación Ininterrumpido. Al momento de un fallo eléctrico este dispositivo provee a la Pc de energía por un corto periodo de tiempo en el cual podremos guardar todo y apagarla correctamente.

Definition UPS: It means Uninterruptible Power System. At the time of a power failure, this device provides the PC with power for a short period of time in which we can save everything and turn it off correctly.

Fuente de alimentación. / Power supply.

Para comenzar a chequear este dispositivo es muy importante que conozcamos en detalles sus características.

To start checking this device it is very important that we know its characteristics in detail.

Nombre de los diferentes tipos de conectores que posee la fuente de poder. / Name of the different types of connectors that the power source has.

♦ Conector de 20 ó 24 pines, también llamado conector ATX. A través de este la motherboard o Tarjeta madre recibe todas las tenciones con las que activara los componentes (teclado, mouse, luces frontales etc.)
El nombre técnico de este conecto es Molex 39-01-2200.

♦ 20 or 24-pin connector, also called ATX connector. Through this, the motherboard receives all the tensions with which it will activate the components (keyboard, mouse, front lights etc.) The technical name of this connector is Molex 39-01-2200.

IMG_20201002_144747.jpg

♦ Conector auxiliar de 4 pines (12V) proporciona una línea de refuerzo para el procesador y de esta manera no recargar al conector ATX.
El nombre técnico de este conector es Molex 39-01-2040.

♦ Auxiliary 4-pin connector (12V) provides a boost line for the processor and thus does not recharge the ATX connector. The technical name of this connector is Molex 39-01-2040.

IMG_20201002_145021.jpg

♦ Conector utilizado para suministrar energía a dispositivos de almacenamiento como por ejemplo: Discos duros, unidades de CD-DVD y otras funciones.
El nombre técnico de este conector es Molex 8981-04P.

♦ Connector used to supply power to storage devices such as: Hard drives, CD-DVD drives and other functions. The technical name for this connector is Molex 8981-04P.

IMG_20201002_145138.jpg

♦ Conector para discos duros y lectoras Serial-ATA.

♦ Connector for hard drives and Serial-ATA readers.

IMG_20201002_145352.jpg

♦ Y por último el conector para la disquetera, el cual aún sigue existiendo en muchas fuentes de poder a pesar de estar totalmente en desuso.
El nombre técnico de este conector es AMP 171822-4.

♦ And finally the connector for the floppy drive, which still exists in many power supplies despite being totally out of use. The technical name for this connector is AMP 171822-4.

IMG_20201002_145626.jpg

Otro detalle a tomar en cuenta es que algunos modelos de fuentes de poder poseen un interruptor, cerca del conector de alimentación, el cual sirve para cortar el paso de corriente, así que debemos verificar que se encuentre en la posición correcta; 0 es apagado y I es encendido.

Another detail to take into account is that some models of power sources have a switch, near the power connector, which serves to cut off the current, so we must verify that it is in the correct position; 0 is off and 1 is on.

IMG_20201002_150502.jpg

Puentear la fuente de poder. / Bridge the power source.

En esta parte tendré que encender la fuente de alimentación sin tenerla conectada a la Pc, para realizar esta prueba necesitare conectar la fuente al tomacorriente y luego en el conector Molex de 20 ó 24 Pines, debo unir o hacer un puente entre el cable de color verde y alguno de los cables de color negro, utilizare un pequeño cable que tiene los extremos pelados, al yo hacer esto pondré la fuente en cortocircuito y debería encenderse el ventilador, así tendremos la seguridad de que la falla está o no en la fuente de poder.

In this part I will have to turn on the power supply without having it connected to the PC, to perform this test I will need to connect the source to the outlet and then to the 20 or 24 Pin Molex connector, I must join or make a bridge between the color cable green and some of the black cables, I will use a small cable that has bare ends, when I do this I will put the source in a short circuit and the fan should turn on, so we will have the assurance that the fault is or not in the source of power.

IMG_20201002_151058.jpg

IMG_20201002_150932.jpg


IMG_20201002_151407.jpg
Fuente de Fotos: Propias capturadas con una cámara Síragon.
Modificado el tamaño: Con el Programa Paint.
Photo Source: Own photos captured with a Síragon camera.
Modified size: With the Paint Program.

Ahora si estoy completamente segura que la fuente de poder sufrió daños ya que no mostro ninguna actividad al momento de puentearla, lamentablemente tendré que adquirir una nueva.

Now if I am completely sure that the power supply was damaged since it did not show any activity when bridging it, unfortunately I will have to purchase a new one.

Gracias por visitar mi Blog… ¡AH! No se olvide de votar, reblogear y comentar.

Thanks for visiting my blog... Ah! Don't forget to vote, reblogear and comment.

Traducido con / Translated with:
Traductor.jpg



0
0
0.000
11 comments
avatar

Hello @elmundodexa
Wow, you are a little computer repairer, I congratulate you. I repair other things in the house, but what has to do with computers, I prefer to call a technician Lol

0
0
0.000
avatar

alegria.jpg Hola @josevas217, esa en mi meta reparar y actualizar yo misma mi Pc… Gracias por su apoyo y comentario.

0
0
0.000
avatar

Buen comienzo, poco a poco iras aprendiendo… Feliz día.

0
0
0.000
avatar

alegria.jpg Comenzar es el paso mas importante... ahora a mantener el paso.

0
0
0.000
avatar

Hello dear @elmundodexao.

I liked this second post. Congratz!

I have a little anecdote to share:

so we must verify that it is in the correct position; 0 is off and 1 is on.

It's not really a "zero", nor is it a "number one" or a "letter I".

These two characters that we see are to indicate if the circuit is "closed" (O) or "open" (I).
That character that we can interpret as a "zero" is actually a "circle" that symbolizes the closed electrical circuit.

I just wanted to share this curiosity with you.


This source checking method is actually what I call the "Mc.Giver method".

Over time I could realize that it is always better to have a power source tester since we could more accurately detect the type of failure that it presents and in which of the voltages is where the deficiency would be.

image.png
Source

Cheers!

0
0
0.000