Kit build session 2

in STEMGeeks2 months ago

Here are the pictures of my second building session on the 6-position-dc-power-distribution-kit

This is a picture with my soldering iron, I have replaced the small tip with a much larger tip. I had problems with soldering the fuse holders as all the copper on the board was sucking the heat from the iron making hard to get a proper joint. With the bigger tip it was much better soldering the power pole connectors to the board:

6posdist-step5.jpg

This picture shows the bottom on the board after soldering all the power pole connectors:

6posdist-step6.jpg

This is the finished build of the board mounted in the 3D printed case supplied with the kit:

6posdist-finished.jpg

So the next session will be a different project.

Posted with STEMGeeks

Sort:  

Now I am able to connect the dots and you share it all step by step that made it easy to understand. good one

I need to share this with my son. I am sure he will want to start buoldming this soon. He has his first rig and power supply coming today.