SCHOOL PROJECT || WATER LEVEL INDICATOR CONSTRUCTION

avatar

Good evening guys, today was somehow stressful for me due to the tasking project which we we're given in school and we are grouped into different categories and we are given different assignment to work on.

IMG_20210630_134243.jpg

The assignment given to my group was to construct a water level indicator alarm, when we were told the assignment to do, we all didn't know where to start from or what to do but we had to make research so as to do it, so for the material we used, we had to contribute some amount of money in other to get them and the total amount which we used to get those materials is #20,000 (twenty thousand naira), the money covered all the expenses we need to get the project done.

IMG_20210630_114753.jpg

We are to meet in the school this morning to start the project work and submit it so we all met t exactly 10am in the morning to start the work and all our thought was to quickly start and finish within a short period of time not knowing that there is a lot more to it and we can just finish that project within a short period of time.

IMG_20210630_114751.jpg

IMG_20210630_134102.jpg

We started by climping the led into the board in a linear way and we climp four led parallel to each other, then we added the resistor for each led which is 330 ohms resistor also parallel then we added the little bulb to each phase so as to show sign of the water level. We also have the battery which we use to power the connection in other to make the alarm work.

IMG_20210630_114805.jpg

We connected all the first time and tried it to make it work but everything didn't produce what we want we were on it for line 2 hours before we got an idea on what to improvise in it and we tried it, it turn out well and we were so happy after all the stress we face just to make it work from 10am which could only finish the first stage at 3pm but we will have to continue tomorrow to finish everything.

IMG_20210630_134247.jpg

Thanks for reading through I still remain @mayorkeys.



0
0
0.000
2 comments
avatar

Great post and well done with the project! What actually goes into the water to act as a sensor? I get the piezo alarm buzzer and LED indicators, but what did you use, or how do you measure the level of liquid and set the alarm to go off at that level?

0
0
0.000