Importance Of Laptop Cleaning 🧹🧹

avatar
Importance Of Laptop Cleaning 🧹🧹

Hello friend's! hiver's!
How are you guys?? hope you all are well


Friends, today I cleaned my laptop, after which I felt that I should share this with you.
As soon as I opened the laptop, there was a lot of dust inside it, which I later cleaned with a toothbrush
And whatever I had opened and cleaned all the components and am sharing them with you.



These are all the components of the laptop which are now connected together in the laptop, now I will separate them slowly.



This is the motherboard to which all the components of the laptop are connected like fan RAM hard drive etc.
The motherboard is the heart of a computer so that the laptop runs smoothly.



Whenever we have to clean the laptop, we should start with the fan because the most dust is our fan, if the fan gives trouble, then the laptop has to be restarted again and again.



Remove the RAM after the fan and clean it because if there is dust in the RAM, then the laptop starts but the screen becomes blank.



Remove the RAM after the fan and clean it because if there is dust in the RAM, then the laptop starts but the screen becomes blank.



This is the CD / DVD drive that we insert the CD / DVD in our laptop or desktop.



This is a wifi card, due to which wifi connectivity is possible in the laptop, if the laptop does not have this wifi card, then wifi connectivity is not possible in the laptop.



These are CD drive connectors, but laptops or desktops have multiple connectors that connect other components together.


We must clean our laptop in 1 year or 2 years because in such a long time more dust gets accumulated inside it, due to which the laptop starts misbehaving or sometimes it happens that small insects like fan or any other components. The paths enter the laptop or desktop, which can cause problems in the circuit of the laptop or desktop, so we need to clean the laptop or desktop.


I hope you all like it ☺️☺️☺️



twitter | instagram | nft showroom

Thank You Very Much



0
0
0.000
4 comments
avatar
(Edited)

You used a toothbrush to clean the board of your laptop? 😲 I hope it did not dislodge a component. The SMD components are initially welded but over the time as it is being used, and also considering the environmental conditions, there is a possibility that some of this may come loose and using a toothbrush that have hard bristles may knock them out. I use a small and soft paint brush to clean mine.

Also, I noticed that you placed those ESD sensitive modules directly on a blanket which looks like it has some silk/nylon materials. Remember to be very careful where you disassemble and place those ESD sensitive modules as materials like silk/nylon/plastic tend to hold static charges that can damage the modules.

Anyways, thanks for sharing

!1UP

0
0
0.000