[ESP / ENG] Alternativa para Conectar un Electroventilador de Automóvil / Alternative to Connect a Car Electric Fan

avatar

yo.png

Hola querida comunidad, hoy les traigo una solución para conectar el electro ventilador de un automóvil, si les deja de trabajar y no consiguen como ponerlo a funcionar o como me sucedió, que los cables originales se fundieron. Me encontraba viajando y me dejo de trabajar el electro ventilador, fui para una venta de repuestos, me recordé de un trabajo que hice para la universidad y compre lo necesario, con todo a la mano y unas herramientas que tenía en el auto empecé a trabajar, hay que hacerlo con mucha paciencia para no confundirse.

Materiales necesarios, un relay de cinco patas, un enchufe para el relay, una valvula de temperatura, teipe, 3 metro de cable automotriz, con todos los materiales, manos a la obra, esto les servirá, para dejarlo trabajando con esa conexión si así lo desean.

Hello dear community, today I bring you a solution to connect the electric fan of a car, if it stops working and you cannot get it to work or as it happened to me, that its original cables melted. I was traveling and the electric fan stopped working, I went to a spare parts sale, I remembered a job I did for the university and bought what I needed, with everything at hand and some tools that I had in the car I started working, You have to do it with a lot of patience so as not to get confused.

Necessary materials, a leg relay, a plug for the relay, a temperature valve, teipe, 3 meters of automotive cable, with all the materials to get to work, this will help you, to leave you working with that connection if you wish.

materiales electro.png

El primer paso, por la parte de abajo del relay, conseguirán, unos números que corresponden a cada una de las patas del relay, tomar un polo positivo de la batería del auto y conectarlo directamente al pin 30 y pin 86 del relay, observamos los números, conectas al enchufe, para poder utilizar los cables que corresponden a cada pata.

The first step, from the bottom of the relay, will obtain, some numbers that correspond to each of the legs of the relay, take a positive pole of the car battery and connect it directly to pin 30 and pin 86 of the relay, we observe the numbers, you connect to the plug, to be able to use the cables that correspond to each leg.

RELAY 1.png

Segundo paso, luego de tener el primer paso listo, tomamos el pin 87 del relay y lo conectamos directamente al positivo del electroventilador con eso tendremos el lado positivo listo, pongan cuidado a los números del relay para que no se confundan con los cables.

Second step, after having the first step ready, we take pin 87 of the relay and connect it directly to the positive of the electric fan with that we will have the positive side ready, pay attention to the relay numbers so that they are not confused with the cables.

dd.png

Tercer paso, del polo negativo de la bateria del automovil, sacaremos un cable que irá directamente al negativo del electroventilador, al mismo tiempo, de uno de los polos de la válvula de temperatura, tomaremos un pelo del mis negativo sin cortarlo y a su vez, el otro polo de la válvula al pin 85 del relay.

Third step, from the negative pole of the car battery, we will take a cable that will go directly to the negative of the electric fan, at the same time, from one of the poles of the temperature valve, we will take a hair of the negative without cutting it and in turn, the other pole of the valve to pin 85 of the relay.

eeee.png

Para concluir, con esos 3 pasos finalizamos el circuito del electroventilador, ahora toca encender el auto y esperar que arranque, de no llegar a prender, revisar la válvula de temperatura, si está dañada o mirar bien los pines del relay. Espero les sirva, muchas gracias por leerme.

To conclude, with these 3 steps we finished the electric fan circuit, now it is time to start the car and wait for it to start, if it does not start, check the temperature valve, if it is damaged or take a good look at the relay pins. I hope it helps you, thank you very much for reading me.

lllll.png

Imágenes tomadas con una cámara fotográfica samsung.

Images taken with a samsung camera.

IMG-20210409-WA0058.jpg

¡Cuentame mas sobre ti!

Tell me more about you!

© 2021, Jorgemesaa



0
0
0.000
3 comments
avatar

Congratulations @jorgemesaa! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 800 upvotes.
Your next target is to reach 900 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Support the HiveBuzz project. Vote for our proposal!
0
0
0.000
avatar

¡Felicitaciones!


Has sido votado por @entropia

Estás participando para optar a la mención especial que se efectuará el domingo 18 de abril del 2021 a las 8:00 pm (hora de Venezuela), gracias a la cual el autor del artículo seleccionado recibirá la cantidad de 1 HIVE transferida a su cuenta.

¡También has recibido 1 ENTROKEN! El token del PROYECTO ENTROPÍA impulsado por la plataforma Steem-Engine.


1. Invierte en el PROYECTO ENTROPÍA y recibe ganancias semanalmente. Entra aquí para más información.

2. Contáctanos en Discord: https://discord.gg/hkCjFeb

3. Suscríbete a nuestra COMUNIDAD y apoya al trail de @Entropia y así podrás ganar recompensas de curación de forma automática. Entra aquí para más información sobre nuestro trail.

4. Visita nuestro canal de Youtube.

Atentamente

El equipo de curación del PROYECTO ENTROPÍA

0
0
0.000