Gratuitous hand-modelling and other technical stuff

in The Pew: Guns & more7 months ago

If you know anything about me you you'll know I'm a shooter; Long-range and handgun primarily. I compete around the country at practical long-range shooting events, cull professionally and do some other things also.

When I say long-range I mean 1600 meters, a mile and more. It's something I've spent a lot of time mastering getting very good at long-range shooting and I hone my skills weekly.

In pursuit of repeatability and accuracy I make my own ammunition and have done a few posts here in The Pew: Guns & More if you're keen to scroll. Today I wanted to talk about another element as I made some ammunition over the weekend and, why not right?

6.5mm creedmoor rounds - The black and red sharpie marks are so, after firing, my brass can be easily identified from others and I get it back to re-use for reloading.

Long-range shooting is not an easy thing; Many elements have to come together to send rounds accurately to their point of aim:

Rifle system set-up, the zero, scope mounting and levelling process, weather factors like temperature, wind, altitude, humidity. Slope-angle the shot is being taken at, the point of the compass one is shooting, azimuth. Aerodynamics, the turning of the Earth, Coriolis...The shooter and his or her skills, the ammunition, target-movement and speed...If you think it's just pointing and shooting at the cross-hairs on the reticle then you'd be wrong; It goes far deeper. It is science....And the movies get it wrong.

I work to eliminate or mitigate possible causes for lack of accuracy in my shooting. This means that I train myself:

Trigger-pull, breathing, wind-calling, target acquisition, the speed at which I obtain field firing solutions, get the rifle-system ready to operate...I work at it all because not knowing those things intimately when not under duress will mean those problems will compound when something is on the line.

Weighing and measuring

I don't want to make this a super-long post but basically, I weigh and measure my ammunition.

Ammunition has an overall length tolerance, the OAL, of the completed round and this is tuned to the rifle-system I'll use it in. That process, of load development, is long-winded but it is critical for mission-success when operating.

I batch my empty cases by weight, discarding those that are too light and rotating the others through as required. I measure them for correct case-length tolerance and then when loading to make sure the projectile is seated at the exact depth required to deliver the OAL I need...Then I measure it. You can see how I do this below.

Some of the tools

Mitutoyo vernier caliper measuring an empty case. There's a minimum and maximum tolerance - Too long and I trim it, too short and I toss it.

This very sensitive electronic scale is used for batching brass. I weigh each one and separate them into weight-batches. Too light and they become training rounds then are discarded. I also weigh the completed, reloaded, rounds to ensure they are full of gunpowder. Check, recheck, then check again - That's what mitigates risk.

Once the round is reloaded I check them for overall length, that OAL thing I mentioned above, but it's not as straight-forward as applying the vernier calipers again. I'm looking for precision here, so I have to be very accurate...And do things differently.

The image below shows HOW NOT to measure overall length.

The very tip of the projectile, called the meplat, can often vary from tip to tip so measuring off it is not going to give consistent results. The meplat is what cuts the air in flight and different meplat's will affect how the projectile behaves in flight; It affects the ballistic coefficient of the projectile.

So, I use a different method of measuring the overall length of the completed round. It's called a comparator gauge. A simple, but effective little gadget.

Comparator gauge

There's one below - It's a small thing really, with a big job.

What it does is allow the bullet to slip inside the calibre-specific gauge right up to the ogive. This part of the bullet is perfectly symmetrical and allows for consistent measurement or each round.

The images below show how it works. The bullet simply slips into it until it hits the ogive which is where it stops. See top right and lower right below where I've shown where the ogive is both in and out of the gauge.

The comparator gauge attached to the vernier caliper and once re-zeroed is ready to use.

I measure every precision round I make; Yes it takes time, the entire process of reloading precision ammunition takes a lot of time really - But not doing it right at every stage will affect the final shot.

This next set shows the gauge attached to the caliper which simply screws on. You can also see a round being measured; See where the gauge has stopped on the ogive in the top image? Also, the lower right image shows the meplat on a projectile that I was talking about earlier.

Another gratuitous hand-shot showing me operating the vernier caliper to measure overall length of a completed round. The vernier caliper measures in millimetres and inches - I use inches.

P3070042.JPG

Another close up of the tip of a round. In this one you can see the anomalies in the meplat quite clearly. The meplat is also where the projectile will typically "mushroom" out to cause more damage to the target.

Most military and law enforcement snipers and sharpshooters use factory-made match-grade ammunition due to the volume they require. I have a lot of experience with it and good, repeatable, results can be achieved although I found that the standard deviation in muzzle velocity was not acceptable for what I wanted and so I moved away from it; Having a standard deviation of over 10 feet per second was not going to work for me. It's also much more expensive to purchase than making one's own.

Making ammunition is a constant process for me; I can always be found doing one element of the process or the other but I actually enjoy it a lot. I find the repetitive action relaxing and with some tunes and snacks...I'm set for a day.

Many of my shooting mates do not go to the extent I do when it comes to ammunition; If I was making hunting rounds I'd not do it either to be honest. I don't do this process when making handgun ammunition either, volume is the key there. For long-range though I see it as essential, and enjoyable.

If you have any questions or comments feel free to drop them below, I'm happy to clarify anything. Thanks for reading.


Design and create your ideal life, don't live it by default - Tomorrow isn't promised so be humble and kind

Discord: galenkp#9209

Sort:  

Ah, I'm so envious. I am just aching to work up some loads for the new Sako .22-250 and still not able to find powder or Large Rifle Primers over here. The imperfections in the metplat can certainly affect accuracy (I know you are aware, just for others).

I prefer the polymer tips mainly for that reason (plus they just look cool). While some of the earlier ones were known to have issues with slight melting in high power/velocity rounds, the newer polymers are more solid to avoid this. They keep their shape, and also keep the hollowpoint behind them more aerodynamic and from clogging.

IMG_20191005_134425.jpg

I like the polymer ones too, for the same reasons, including the looks thing.

I can't believe you're still unable to get components Kris. It must be causing a lot of frustration and probably causeing some to scale back shooting operations. Not something many would feel happy about.

Damn man. You are a bona fide shootist! My brain was boggling even before I got to ogive - gotta respect that knowledge!

Thanks mate...I have been doing this for a while and whilst the learning curve is steep I'm climbing the mountain. It's science really. And an art.

It sounds it. I think you have a fair mastery over it by the sounds of it. Never play yourself down!! Ya big gun-expert Titan!!!! :0D

Sometimes Titans are modest and seek not to belabour their Titanism to others. You would know this well as you are a humble Titan also. Yes, I know how to shoot and do other stuff around it...Yes, I'm good at it. Mastery? I'll never allow myself to stop learning. It is the Titan way. :)

I felt the same way😂😂 I need a dictionary when I read G's posts about guns, he knows his stuff

I think military and law enforcement might have slightly bigger budgets and be bulk buying a little bit more than you? XD

Are hunting rounds harder?

And at a wild guess there would be a lot more handgun ammo to make?

Hunting rounds are easier...Not precision loading and generally close enough is good enough. At the range hunting happens at it's not as critical to have the consistency and precision I seek with long-range. And yes, loads more hand gun rounds are required. I have thousands, and never let the stocks dip below a certain amount.

I love the hand model tag hahah nice.

These are really cool gadgets and stuff. Do you use this ammo for competition, culling or both? I know you said the long range stuff so not sure if you keep some with you while culling just in case you need to do a distance shot like that.

How do you trim the casing? Do you grind it a little bit?

This stuff is totally science and it’s really cool! Hoping one day to get these kinds of tools and gadgets for myself. One can never have too many tools I think!

Do you use this ammo for competition, culling or both?

I only make precision rounds so both. It's not in me to do this job with anything less than my best effort. Hunting rounds don't need to be as precise as the distances are not that great, but for long-range purposes precision loads are required. I have A little factory ammunition for my .243 culling system and a rifle profile in my ballistics solver to suit, but that's more as a back up. Remember, one is none and two is one. Always have a back up.

How do you trim the casing? Do you grind it a little bit?

I have a post coming up on this topic. It's cut off using a purpose-made tool. You'll see.

Tools man...How good are they? Let's just say, bloody good! Sums it up. 😉

I started a Hive personality post and the first post person I wrote about was you.
Here
https://ecency.com/r2cornell/@melissaofficial/hive-personality-part-1-who-is-galenkp

Hand model AND leg model... that is quite a resume you got going there @galenkp

It's thin in the actual qualifications area Jaynie...my CV. I'm am but a knucklehead after all.

So it's good to attach my modelling skills...Hands, legs...At least some of me ticks the boxes.

Thanks for your comments, as always. :)

sure thing.

I didn't know that you can actually make your own ammunition. There is so much attention to details required. Very ocd-esque
!ENGAGE 10

Yes, it's possible. I make rifle and handgun ammunition and it's possible to make ones own shotgun shells too however I don't shoot enough shotgun to warrant it. It's just something I do...Feels good to have a skill most don't.

Thank you for your engagement on this post, you have recieved ENGAGE tokens.

Congratulations @galenkp! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You have been a buzzy bee and published a post every day of the week

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

Check out the last post from @hivebuzz:

Feedback from the March 1st Hive Power Up Day

It is awesome that you can made your own ammunition that's a skill on it's own and saving you lots of dollars . It's quite a process but interesting 👍

Yeah, I'm a have-skills sort of guy...Some play video games.

Better learning skills then playing waste of time video games 😆