What branded materials do I use? [ENG-ESP]

avatar
Greetings community members, welcome to my post once again, I'm Nitsu and I want to share some thoughts on my latest PLA purchase.

Saludos miembros de la comunidad, bienvenidos a mi post una vez más, soy Nitsu y quiero compartir algunas reflexiones sobre mi ultima compra de PLA.

20220813_104127.gif

When I was just starting in the world of 3D printing I had no idea about materials or brands, I was learning through trial and error and talking to other friends makers. Currently in terms of quality I would dare to say that all brands are at a good level, but at least in Argentina with the dollar problem there was a considerable increase in inputs for 3D printing.
Cuando apenas empezaba en el mundo de la impresión 3D no tenia ni idea sobre materiales ni marcas, fui aprendiendo por medio de prueba y error además de hablar con otros amigos makers. Actualmente en cuestión de calidad me animaría a decir que todas las marcas están a un buen nivel, pero al menos en Argentina con el problema del dólar se vio un aumento considerable en los insumos para imprimir en 3D.

20220813_104149.png

20220818_163453.gif

Lately I have been using a brand called GST, from an Argentine company that imports the material from its plant in Miami, a few years ago when I started buying the material with them the kilo of PLA cost $850 the equivalent of about $3 dollars at the current exchange rate in my country clearly with the inflation issue was increasing and I was adjusting my prices to continue earning with each job but at the same time I did not want to make my products so expensive so that my customers could continue to access it. In recent months this same material came to cost $1850 ($6 dollars) and in approximately less than two months increased its price to $2250 ($7.5 dollars) really for this point the price of this brand had matched the price of other brands that offer a little more quality so now it is no longer profitable for me to continue buying from this supplier.
Estos últimos tiempos estuve usando una marca llamada GST, de una empresa Argentina que importa el material desde su planta de Miami, hace unos años cuando comencé a comprar el material con ellos el kilo de PLA costaba $850 el equivalente a unos $3 dólares a cambio actual en mi país claramente con el tema de la inflación fue aumentando y yo iba ajustando mis precios para seguir ganando con cada trabajo pero a la vez no quería encarecer tanto mis productos para que mis clientes pudieran seguir accediendo a él. En los últimos meses este mismo material llego a costar $1850 ($6 dólares) y en aproximadamente menos de dos meses aumentaron su precio a $2250 ($7,5 dólares) realmente para este punto el precio de esta marca se había igualado al precio de otras marcas que ofrecen un poco mas de calidad así que actualmente ya no me es rentable seguir comprando de este proveedor.
20220813_104006.png20220813_104247.png
What brand do you use, and would you switch brands if it got too big? I'd love to read your experiences in the comments.
¿Qué marca utilizan ustedes? ¿Se cambiarían de marca si aumentara demasiado? Me encantaría leer sus experiencias en los comentarios.
20220813_104112.gif 20220813_113826.gif

END.png

My 3D printing works @nit_3dprinting

Mis trabajos de impresión 3D @nit_3dprinting
Translated by DeepL
Traducido con DeepL
All images are my own
Todas las imágenes son de mi autoría

My last post Making my job easier with BL Touch [ENG-ESP]
Mi último post Making my job easier with BL Touch [ENG-ESP]



0
0
0.000
4 comments
avatar

I use what is available locally and if possible made in from where I am at. Currently since I am in Taiwan I will try to find made in Taiwan brands. So far I have been really loving a brand called SpiderMaker. Its a Taiwanese brand that makes 3D printers and Filaments as well.

If you can have access to them in your country I highly recommend giving it a try. The Matte series especially ~ they print beautifully.

0
0
0.000
avatar

No, me suena el nombre de la marca, aca en Argentina ultimamente las importaciones se han complicado asi que veo dificil poder experimentar co nesa marca de filamento. Muchas gracias por la paciencia al esperar mi respuesta, n oestaba logrando entrar a mi cuenta jajaja

0
0
0.000
avatar

I like to try different kinds.

I have only used PLA compound.

Tecbears is good. I have some PolyTerra that is not working good.

Thank you for sharing these brands with us.

0
0
0.000
avatar

Gracias a ti por pasarte a leer y dejar tu comentario @futuremind estos dias dije que iba a estar más atento a Hive pero no lograba entrar a la cuenta jajaja pero ya lo solucione.

0
0
0.000