Some considerations on the factors influencing the composting process
(Edited)
Dear readers, to continue with some aspects related to composting, this publication will describe some factors that influence the process. In this sense, it is necessary to comment that composting is based on a biological process carried out by microorganisms, therefore it is affected by all those factors that influence the growth and activity of these microorganisms, within the main factors that condition the composting process are the type of substrate (waste), aeration or presence of oxygen, moisture content, pH and carbon/nitrogen ratio. These factors condition and determine the development of the process and the obtaining of a quality final product.
The materials or raw materials used for composting determine the quality of the product obtained after the composting process. In addition, their physical characteristics influence the composting process since they can affect the decomposition and the presence of oxygen in the compost pile.
The following are what we consider to be the main characteristics that should be taken into account in the composting process
- Particle size and porosity
The ideal particle size according to some bibliographic sources is 2 to 5 cm although the size could be larger which would favor the circulation of oxygen within the compost pile, the greater the porosity of the pile, the greater the aeration and activity of the microorganisms, the smaller the particle size, the pile tends to compact which results in less aeration and therefore less microbial activity, slowing the process.
- Aeration
Composting is a process that requires the presence of oxygen, i.e. an aerobic process, for microorganisms to develop, therefore, aeration is an important factor in the composting process since oxygen is essential for the metabolism of the microorganisms that participate in the decomposition of organic matter. Aeration is influenced by the size of the particles to avoid compaction of the pile as mentioned in the previous section, but in addition to this, it is important to manage the pile by turning the material periodically to improve the entry of air.
- Carbon/Nitrogen Ratio
To obtain a good quality compost it is important that there is a balanced ratio between both elements. Theoretically, a carbon/nitrogen ratio of 25:1 or 35:1, that is, 25 and 35 atoms of carbon for each atom of nitrogen, but this will vary depending on the raw materials that make up the compost. Prior to the elaboration of the compost, the carbon-nitrogen ratio must be determined, which is fundamental to obtain a good substrate for the development of microorganisms. The optimum carbon-nitrogen ratio can be calculated using a formula proposed by Rynk, et al. (1992); to do this, the percentages of humidity, carbon and nitrogen of each raw material are taken, data that can be collected from the literature, and based on this data the formula gives the amount of each raw material to be used in the preparation of the compost.
It is important to take this parameter into account, especially when the product is to be marketed, because if the ratio is higher than 35, there is not enough nitrogen for the proliferation and development of microorganisms and biological activity will decrease, which will delay the process. In the opposite case, if the value is below 25, the nitrogen will be in excess, possibly generating an unpleasant odor in the mixture due to the loss of ammonia gas.
- Humidity
In the composting process it is important to maintain moisture levels in a range between 40-60% if the moisture content is higher, water will occupy all the pores and therefore the process would become anaerobic (without oxygen), i.e., putrefaction of the organic matter would occur. If the moisture content is too low, the activity of the microorganisms is reduced and the process is slower. Of course, the moisture content will depend on the raw materials used, where the carbon-nitrogen ratio plays an important role, balancing the quantities of raw materials used. To determine the moisture content of the compost manually, a sample is taken by hand and pressed; if a few drops of water appear on the hand, the moisture content is optimal; if, on the other hand, after pressing the material, it does not emit water, it means that it lacks moisture.
.jpg){kind=link}
- Temperature and pH
As mentioned in one of the previous articles, the temperature of the composted mass reaches temperatures ranging between 10 and 40 °C, this temperature increase is related to the presence of microorganisms, this temperature increases as the days pass until reaching ranges between 40 and 70 °C which is the reflection of biological activity within the ensiled mass, which allows to control pathogens, parasites and weed seeds. The ideal Ph for the process is between 6.5 and 8.0 for the microorganisms to have the ideal conditions.
| Final considerations |
|---|
Dear readers, as can be seen there are some factors that influence the composting process and it is evident that the ideal conditions are sought for the microorganisms that decompose the organic matter, all these elements also influence the natural ecosystems, therefore, depending on the edaphoclimatic conditions (soil and climate) the decomposition of organic matter is done quickly and efficiently. The biotic factor gives us great benefits without incurring great costs, we only need to understand nature and its processes.
| Bibliographic references |
|---|
Urbano, P. (2002). Phytotechnics Plant production engineering. Madrid: Mundi-prensa.
Guerrero, J. (1994). Organic fertilizers technology for the ecological management of soils Lima: DANAC.
Hernández, O.; Ojeda, D.; Lopez, J. and Arras, A. (2010). Organic fertilizers and their effect on soil physical, chemical and biological properties.
From agrotecnia we reiterate our gratitude to our followers and all the communities that value our agricultural content, this commits us to continue sharing quality information with the whole hive.
0
0
0.000
Nice post.
There are several sites that sell composting starter kits and worms. I would avoid these. Imported composters and worms can have devasting effects on the native enviroment. Notably, there were few worms in North America. European settlers imported European worms. The worms had devastating effects on native species.
I think it is best for people to use composters from the local area. To start my mulch pile, I walked into a local wilderness area that was in the same drainage as my garden. I filled a little jar from an area that was composting well. I nurtured what I hope would have a higher percent of native composters. My compost looks a little more like the type of compost I find in the mountains.
!hivebits
Success! You mined .9 HBIT & the user you replied to received .1 HBIT on your behalf. mine | wallet | market | tools | discord | community | <>< daily
Hello dear @irivers, thank you for your valuable comment, you are absolutely right, we must use local resources that are adapted to the conditions of our ecosystems, thus ensuring that the processes are carried out efficiently. One thing is clear and that is that soil microorganisms are the fundamental element for the activation of natural processes.
See you later, have a great weekend.
Very informative and can be used as a reference for compost noobs like me. 🙂
What I initially know about compost is just leaving leaves to rot underground. 😁
!1UP
Hello dear @thecuriousfool, good that this article is useful for you and many users, in the decomposition of the leaves act many microorganisms found in the soil and perform the same activity that occurs in a compost.
See you later my friend, have a great weekend.
You have received a 1UP from @thecuriousfool!
@stem-curator, @neoxag-curatorAnd they will bring !PIZZA 🍕
Learn more about our delegation service to earn daily rewards. Join the family on Discord.
Thank you for your support dear friends.
Thank you for sharing this amazing post on HIVE!
Your content got selected by our fellow curator @priyanarc & you just received a little thank you via an upvote from our non-profit curation initiative!
You will be featured in one of our recurring curation compilations and on our pinterest boards! Both are aiming to offer you a stage to widen your audience within and outside of the DIY scene of hive.
Join the official DIYHub community on HIVE and show us more of your amazing work and feel free to connect with us and other DIYers via our discord server: https://discord.gg/mY5uCfQ !
If you want to support our goal to motivate other DIY/art/music/homesteading/... creators just delegate to us and earn 100% of your curation rewards!
Stay creative & hive on!
Hello dear colleagues of @diyhub, I am very grateful for the support that my article has received and the promotion that you have made, for us it is of great value. Have a great weekend.