Maintenance of a mini laptop model MAGALHAES MG101A4

avatar

▶️ Watch on 3Speak


Today I had some free time at home so I took advantage of the free time to do maintenance on my brother's computer model MAGALHAES MG101A4, as it has been presenting a failure where there are times that turns on but does not give image, in such a case that the problem is not solved change the motherboard for one that I already have a spare that works perfectly.

The materials that I have used to disassemble and make a quick maintenance of the computer were:

  • Screwdriver of shovel and of Estella.
  • A small paintbrush.
  • Coolant paste.

The first step is to remove the battery to see the screws that are in that place, then remove the screws that hold the motherboard to the case in the back.

After removing the screws, we proceed to remove some pins that are in the same place where the battery goes, it is to release the keyboard of the computer, then remove the keyboard by loosening a lock that is so that if the keyboard fex comes out, and remove the protector that is secured with a screw, it has two screws in this proctor but it had already been disassembled previously and damaged where the other screw goes.

After removing the protector I remove all the screws that hold the case and the hard disk, once the screws are removed I lift the lock that holds the hard disk fex to remove it.

I continue removing the network card that is fastened with a screw and remove the cables that is subject to this, under this are two Flex that are the sensor and the mouse keys of the laptop, I also remove the ram memory card that is located near the previous ones.

Having all this area clear process to remove the front casing of the laptop, not having the screws that hold it is out of pressure, I use a paddle screwdriver.

Once I have the boards in sight I proceed to remove the connectors that goes to the motherboard and the audio and current, removing plumber the plate containing the power button, USB ports, audio, to clean the dust.

Already almost finalizing process to the motherboard removing the cables of current of the ventilator, the cable of the screen and all the others that is in this to clear the card and to retire it easily, to remove the dust, and to change the battery of the BIOS.

When removing the motherboard, the cooling system of the CPU is clear, I proceed to remove it to disassemble and clean it, removing the residues of the thermal leg, to put it back in place and put a new thermal paste.

With this ends the cleaning process, I put the parts back in place, in my case I put a motherboard that I had as a spare because when testing it was still with the fault leaving it to check later to see if it has a solution to the fault, remaining in operation.

Greetings my dear colleagues I hope you find my post helpful, I say goodbye and have a great day.


▶️ 3Speak



0
0
0.000
11 comments
avatar

Hola amigo, como me gustaría hacerle mantenimiento a mi computadora pero prefiero dejarlo en las manos de un compadre. chevre que puedas ayudar a tu hermano y sepas que hacer,maravilloso. No pude escuchar el video porque tengo problemitas por acá pero me ayudé con el escrito, gracias por la explicación. Feliz noche y saludos desde Margarita.

0
0
0.000
avatar

Saludos. Si, es una gran ventaja saber hacer el mantenimiento de la computadora, así se ahora el pago de este, gracias por visitar mi post.

0
0
0.000
avatar
(Edited)

Hola @vinewhite, gracias por compartir tu proceso de mantenimiento para laptops, en mis tiempos como técnico, nunca quise reparar laptops a nivel de hardware, lo consideraba como algo bastante delicado, esto sin duda servirá para que otras personas comprendan el proceso de desensamble de al menos este modelo y lleven una noción general del proceso.

Revisando tu perfil, noté que a pesar de llevar casi un año en la plataforma, no realizaste en ningún punto tu presentación en hive(corrígeme por favor si estoy equivocado), algo que es de gran importancia, pues permite validar los perfiles y evitar las llamadas "cuentas fake", un filtro muy importante que le da autenticidad a nuestros perfiles. De igual manera, te invitamos a fomentar la interacción y ser parte de la misma dentro de Geek Zone y en hive en general, eso también aporta valor y nos da a conocer con todos quienes hacemos vida aquí, saludos y bendiciones, excelente día.

0
0
0.000
avatar

Saludos @marcoquin, si está parte suele ser un poco delicada y tediosa en ocasiones dependiendo del modelo hay unos que llevan más tornillo que otras piezas, o por lo menos eso es lo que menos me gusta de desarmar una computadora.

Yo realice una vez una presentación pero revisandola note que fue para una comunidad en específica y tiene muy pocos detalles, gracias por ese aporte lo tendré muy en cuenta.

0
0
0.000
avatar

Tengo exactamente esa mini laptop, pero me quema las baterías, la tengo que usar directo, incluso le empaté un cargador, sé que está mal, pero me cuesta conseguirle piezas, de hecho me hace falta el adaptador del disco duro, el famoso flex, lo rompí sin querer ☹️, no te sobra uno? 🥺

0
0
0.000
avatar

Wao eso sí es un problema grabé, eso significa que la placa está en corto. Ese fex es fácil de conseguir esos lo venden de 5 a 10$ yo lo compre hace un mes, de dónde eres?

0
0
0.000
avatar

Vzla Sucre y vos?

0
0
0.000
avatar

Igual de Venezuela pero en Barquisimeto, un poquito lejos para que puedas comprar el fex jajajajaja

0
0
0.000
avatar

Un saltico no más, naah mentira, por acá debe haber quien venda, sólo que no pensé que fuese a ser tan cariñoso xd, digo, no son 20 o 30$, pero pensé que iba a valer entre 2 y 3$ jaja.

0
0
0.000
avatar

Si el mínimo que se consigue aquí en Barquisimeto es en 5$

0
0
0.000
avatar

Congratulations @vinewhite! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 1000 upvotes.
Your next target is to reach 1250 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out our last posts:

Christmas Challenge - Offer a gift to your friends
HiveBuzz World Cup Contest - Sponsor Feedback and Feedback Request
HiveBuzz World Cup Contest - Prizes from our sponsors
The Hive Gamification Proposal Renewal
Support the HiveBuzz project. Vote for our proposal!
0
0
0.000