disassembly tutorial Lanix x320 [Eng/Esp] [Eng/Esp].

avatar

▶️ Watch on 3Speak


@josuerr291.gif

English

Hello boy you there and Geek zone How are you I am very well and in this opportunity I bring a content for you. The truth I love to bring content and I love to support you in Gameplay support you in tutorials and umboxing, the way to create I love because when we are making videos placing images or writing we are creating and we can do it in this great community.

Today here in Geek zone I share with you a video for you to learn how to disassemble a Lanix Ilium x320 mobile. This team is not very common here in Venezuela as in Colombia but in Venezuela this brand is not known and I have been brought many times to disarm but today I share this video because when you do not know this model of equipment you do not know what you can find inside. The truth is not very different from the others but you need to know the inside to know how far you can insert a screwdriver or a disassembly paddle because if you do not do it carefully you can damage a part of the inside. It is good to know what it looks like on the inside for this reason.

When disassembling you must have these tools

1 Anti-static wrist strap.
2 A number 5 slotted screwdriver.
3 A metal spacer A clamp.
4 A plastic separator paddle.
5 A small amount of rubbing alcohol to clean the contact cleaners.

To disassemble this equipment you have to execute the following process:

  1. Remove the SIM card you have to be very careful to take it out carefully because if you do not do it carefully you can damage one of the legs that goes behind the SIM card and by bending it you would have another problem to repair.
  2. You must separate the removable memory from the equipment with great care not to damage it.
  3. You must detach the battery from the device. When removing the battery you will observe What is the model that I am showing you. There you will find the model, the cereal, the numbering, and the imei of the equipment some data that are not known and the import of the equipment.
  4. With the number 5 slotted screwdriver we have to begin to remove each screw of the equipment are approximately 6 or 7 screws depending on the exact model of this ilion.
  5. With the plastic trowel you are going to begin to separate all the back casing and the bezel of the equipment of the front casing Where is the screen with much care of not embedding the trowel you have to put it by the lateral part inferior side of the equipment and by the inferior part doing it this way with much care you will go discovering it and observing where they have the Flex. The Flex are in the right part and in the left superior part of the equipment also you have to be careful with the entrance of headphones and the pin of load all this you must do it with a lot of care.
  6. With the iron clamp jalaraz the rear casing of the team and will be completely uncovered.
  7. With the antistatic bracelet you will be able to take the equipment, without it not because you can damage the plate of the equipment.
  8. There is a screw on the top right side of the unit which holds the board to the housing of the unit, you will remove this screw.
  9. You have to remove the flexes that are on the unit. Flex of the tactile, is in the superior part, the flex of the screen is in the right inferior part, the motor tool is in the inferior part of the equipment, you must remove the glue that sticks it to the plate, and with much care to take off of the Flex the casing, and the power button.
  10. By doing these steps you can now carefully lift the board off the unit.

Each of these steps are necessary to see the disassembly of our equipment. I hope you liked my content.

content sources

Translated with www.DeepL.com/Translator (free version)


Español

Hola muchacho usted hay y Geek zone Cómo estás Yo estoy muy bien y en esta oportunidad traigo un contenido para ustedes. La verdad me encanta traer contenido y me encanta apoyarlos en Gameplay apoyarlos en tutórales y los umboxing, la manera de crear me encanta porque cuando estamos haciendo vídeos colocando imágenes o escribiendo estamos creando y podemos hacerlo en esta grandiosa comunidad.

Hoy aquí en Geek zone Les comparto un vídeo para que aprendas a desarmar un móvil Lanix Ilium x320. Este equipo no es muy común aquí en Venezuela como en Colombia pero en Venezuela no se conoce está marca y me lo han traído muchísimas veces a desarmar pero hoy Les comparto este vídeo porque cuando no conoces este modelo de equipo no sabes con que te puedes encontrar dentro. La verdad no es muy distinto a los demás sin embargo necesitas saber la parte de adentro para saber hasta donde puedes introducir un destornillador o una paleta de desensamble ya que si no lo haces con cuidado puedes dañar una parte de adentro. Es bueno que sepas cómo es en la parte de adentro por esta razón.

Cuando lo desarme Debes tener estas herramientas

1 Pulsera antiestática.
2 Destornillador de estría número 5.
3 Una pinza de metal separador A.
4 Una paleta de plástico separadora.
5 Un poquito de alcohol para limpiar los limpia contactos.

Para desarmar este equipo tiene que ejecutar el siguiente proceso:

  1. Quitarle la tarjeta SIM tienes que estar muy pendiente de sacarla con cuidado ya que si no lo haces con cuidado puede dañar una de las patas que va detrás de la tarjeta SIM y al doblarla tendrías otro problema para reparar
  2. Debes separar del equipo la memoria extraíble con mucho cuidado de no dañarla
  3. Debes separar del equipo la batería. Al quitarle la batería observará Qué es el modelo que te estoy mostrando. Allí se encuentra el modelo, el cereal, la numeración, y el imei del equipo algunos datos que no se conocen y la importación del equipo.
  4. Con el destornillador de estría número 5 tenemos que comenzar a quitar cada tornillo del equipo son aproximadamente 6 o 7 tornillos dependiendo del modelo exacto de este ilion
  5. Con la paleta de plástico vas a comenzar a separar toda la carcasa trasera y el bisel del equipo de la carcasa delantera Dónde está la pantalla con mucho cuidado de no incrustar la paleta tienes que meterla por la parte lateral inferior lateral del equipo y por la parte inferior haciéndolo así con mucho cuidado irás descubriéndola y observando dónde tienen los Flex. Los Flex están en la parte derecha y en la parte izquierda superior del equipo también tienes que tener cuidado con la entrada de audífonos y el pin de carga todo esto debes hacerlo con mucho cuidado
  6. Con la pinza de hierro jalaraz la carcasa trasera del equipo y quedará totalmente descubierto
  7. Con la pulsera antiestática podrás tomar el equipo, sin ella no porque puedes dañar la placa del equipo.
  8. El tiene un tornillo por la parte superior derecha del equipo la cual sujeta la placa a la carcasa del equipo, sacaras este tornillo
  9. Tienes que quitar los Flex que están en el equipo. Flex del táctil, está en la parte superior, el flex de la pantalla está en la parte inferior derecha, el motor tool está en la parte inferior del equipo, debes quitarle la pega que lo pega a la placa, y con mucho cuidado despegar del Flex la carcasa, y el botón de encendido.
  10. Haciendo estos pasos ya puedes levantar con mucho cuidado la placa del equipo.

Cada uno de estos pasos son necesarios para ver el desarme de nuestro equipo. espero te allá gustado mi contenido

fuentes del contenido


23tbANtZ3arySuvEVCZHWfeqca5jpedmUUdzUJbSJASqA7GHGAgKRQghT31HXd1q8dXhB.png

@josuerr291.gif


▶️ 3Speak



0
0
0.000
4 comments
avatar

Excelente trabajo mi hermano, tienes todo bien organizado. Te felicito, saludos!
!LUV !PGM

0
0
0.000
avatar

Sent 0.1 PGM - 0.1 LVL- 1 STARBITS - 0.01 MOTA - 0.05 DEC - 15 SBT tokens to @bananasfallers, @josuerr29

remaining commands 0

BUY AND STAKE THE PGM TO SEND A LOT OF TOKENS!

The tokens that the command sends are: 0.1 PGM-0.1 LVL-2.5 BUDS-0.01 MOTA-0.05 DEC-15 SBT-1 STARBITS-0.00000001 BTC (SWWAP.BTC)

image.png
Discord image.png

Support the curation account @ pgm-curator with a delegation 10 HP - 50 HP - 100 HP - 500 HP - 1000 HP

Get potential votes from @ pgm-curator by paying in PGM, here is a guide

I'm a bot, if you want a hand ask @ zottone444


0
0
0.000
avatar

Muchas gracias por el apoyo brindado amigo tratando de cada día mejorar y hacer el contenido más excelente el día que dejemos de mejorar comenzaremos a hacer las cosas mal Gracias por visitarme

0
0
0.000