3D Printed Triangle Opening Tool

in ThreeD (3D) Printing9 months ago

phone-tool1.jpg
Image Source: Personal Photo

I recently got a secondhand Android smartphone. It is in good condition but the battery's capacity to hold a charge is virtually null.

It's the type of mobile phone that allows the battery to be swapped easily with a new battery by popping the back cover off. Technically I could do it with just my fingers and some force but I wanted to "do it right" and insert a pry tool into the slot on the cover.

phone-tool2.jpg
Image Source: Personal Photo

Amazon.com has plastic triangle opening tools listed for sale but I didn't want to buy a pack of 10 or 25. Since I have a 3D printer and the tool I needed was plastic I tried 3D printing a triangle opening tool. The pry tool I 3D printed was from thingiverse.com and posted by user outmax.

Since the object I was printing is small even with 100% infill the tool was printed in just a few minutes.

The user outmax left no notes on the Thingiverse post. I suspect if there had been notes one of them would be ABS is recommended over PLA for this print. The opening tool I had printed didn't seem strong enough to handle the job of prying off the back cover of the smartphone.

After several attempts I ended up just removing the back cover with my fingers. Until I get a 3D printer that can handle ABS filament or I construct a proper enclosure for my Tronxy XY-2 Pro I guess this is one item I'll need to buy on-line rather than DIY.

phone-tool3.jpg
Image Source: Personal Photo

My Thingiverse account: https://www.thingiverse.com/holovision/designs
My Thangs account: https://thangs.com/Holovision
3D printing community on Hive: https://peakd.com/c/hive-103035/created

Sort:  

Great job done boss

Thank you.

Yay! 🤗
Your content has been boosted with Ecency Points, by @holovision.
Use Ecency daily to boost your growth on platform!

Support Ecency
Vote for new Proposal
Delegate HP and earn more

This one epic! I used to utilize my finger nail, painful when the phone doesn't open and I crack my own nails. But somehow it reminds me of guitar pick though 🤣

I saw at least one of the Amazon listings describe that theirs' could be used as as a opening tool or guitar pick. I found a guitar pick model on Thingiverse posted by user gabrielfp. I've never played guitar but it looks good. Maybe I should print that out and see if it makes a decent prying tool. Thanks.👍

La cantidad de veces que hacia fuerza con los dedos y me lastimaba jajaja muy buena solución