Signed Out, What is left Out?

1000286618-01.jpeg

Last week, I finished my last paper and signed out from the university. It was a very joyous moment for me and I really appreciate everyone who took the time to leave a comment on my signing out post. It is well appreciated.

Now that I have signed out, you might be thinking that I am completely done with school but that is not so. There are still some things left out to finish up before I can say I am completely done. And to list those things, we have my final year project, post-data, final defense, project exhibition, clearance and National Youth Service Corps (NYSC) Program to process before I can say I am finally done with school.

But at this stage that I am, I have the rest of mind that I do not need to be running about studying for a class or test any longer which in a way feels good. The main focus for now is my final year project. I had earlier written a post about the project, and if you would like to check it out, here is it: Presenting a Final Year Project on UAVs

My project is divided in two phase, which is the hardware phase and the software phase. The hardware is the building of the drone and the software is the building of the machine learning aspect. We happen to be four on my project and my duty on the project is building the drone.

To build the drone, I have been able to get the parts from AliExpress and also been able to assemble it. I faced a lot of challenges in getting the parts, right from having a dollar card that can buy things from the internet to the error in ordering the wrong item.

IMG_20240820_095902876.jpg

Yes this is my drone, and it has only been able to lift to the sky once, not literally fly per se. I am using a f450 drone frame, with a kk2 2.1.5 flight controller and 1000 kV motors. I did not expect that the drone would take this long before flying; I actually thought it would be easier to configure. I think the issue is that I may have missed something so I planned to solve the issue by restarting the factory default and beginning the configuration process from the beginning.

The main aim on my mind now is to be done with drone, allow it to fly before my post data on thursday so that I can get all the mark possible on this project. There are still other things to prepare myself for the coming post-data, which are the project write-up and presentation slides but the most important of all is to get the drone to start flying.

So let me go work on the drone, and I will write back on the end result.

Posted Using InLeo Alpha



0
0
0.000
19 comments
avatar

Congratulations @starstrings01! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You got more than 20000 replies.
Your next target is to reach 20500 replies.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000
avatar

Congratulations again bro.

I hope you'd be able to finish the drone and get it to fly since you have just a day to Thursday.

0
0
0.000
avatar

Yeah I will be.. the post data was postponed yesterday sef. So there is more time but I plan to finish it up this week so I can give myself enough rest.

0
0
0.000
avatar

It's a day and some hours to Thursday. Trust you'll get the drone to fly before then.
Congratulations once again.

0
0
0.000
avatar

Congratulations to you, boss
Work on the drone and get back to us😌😌

0
0
0.000
avatar

Congratulations boss!
Glad to finally meet a funaabite here
Good luck on your project 👍

0
0
0.000
avatar

there are a lot of funaabite here but as for me, I am already a graduate and soon to be an ex-funaabite.

what about you? are you done or still in a particular level?

0
0
0.000
avatar

Yeah, I can see that and I hope to connect with others soon.
Congratulations once again!
I'm in 400L

0
0
0.000