FreeCAD Part Modeling Tutorial 61

Hello Friends in last tutorial we have learned How to model Sheet metal tray in FreeCAD with the help the help of dynamic data addon. In this tutorial we will do part modeling with the help of part design workbench.

First select the front plane and create the sketch profile as shown in below image.

Now extrude to the length of 30mm as shown in below image.

Now select the face and create the profile as shown in below image.

Remove the material completely as shown in below image.

Now select the face and create below profile.

Now Extrude to the length of 50mm as shown in below image.

Now create a Datum plane at distance of -6 from the face.

Now on Datum plane create below profile.

Now create pad of 5mm of created profile.

Now select the face and create a circle as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”

Posted from my Blog https://mechnexus.com with Exxp: FreeCAD Part Modeling Tutorial 61