Water Treatment "Part 26": Various additional filtration techniques.

avatar
(Edited)

Multi-layer filtration:

Water is filtered through many layers of material with varying degrees of fineness when using multi-layer filtration. The filter layers' granule sizes get smaller towards the bottom, the water is first filtered by passing through the layer with the coarse granules.
In order to accelerate the rate at which the material settles at the surface while the water flows downhill, the granules' size and density have to be selected, as well as to avoid combining the components of two distinct layers while backwashing the filter.

A layer of anthracite, which has high particle size and low density, forms part of the multilayer filter. The next layer is made up of sand, then a dense layer of garnet with small granules. Smaller solids are therefore maintained in the lower sections of the filter surface while larger solids are kept in the top layer.


Illustration of a typical drinking water treatment process.

Dry filtration:

When ammonia levels in the water are high, dry filtering is utilised, but this does not imply that this process is confined to just eliminating ammonia; it also removes iron and manganese. A continuous gaseous exchange takes place between the air and the water as it passes over a filtration surface that contains granular filtration material while air is flowing either upward or downward. Since certain bacteria might grow during dry filtering, quick filtration is frequently carried out after dry filtration to get rid of these harmful bacteria.

Upflow Filtration:

The height of the water is adjusted during this process to account for the hydrostatic water pressure required to maintain fluid balance, as well as flow and blockage resistance, which are greatest near the bottom of the filter surface.

Limestone filtration:

The material used to fill limestone filters is calcium carbonate granules or semi-fired dolomite stones. The imbalanced water being treated causes the lime stone granules to disintegrate during the filtration process, necessitating frequent replacement of the filter with new granules. Iron and manganese compounds are eliminated during this procedure.

References:



0
0
0.000
6 comments
avatar

Nice writeup. This article reminds me of how my father's filter. Those days when my dad used to filter our drinking water manually. At the upper layer you would find large stones then the size would progressively decrease.

0
0
0.000
avatar

Do you do your own water filtration? I wish I could see a photo of your father's water filtration system.

0
0
0.000
avatar

My fathers used to do the filtration when I was much younger, not now

0
0
0.000
avatar

Most of the time I tend to be confuse which water treatment techniques is best recommended between filtration and crystallization

0
0
0.000
avatar

Filtration is used to separate a solid and a liquid, while crystallisation is used to form solid crystals from a solution.

0
0
0.000
avatar

Thanks for your contribution to the STEMsocial community. Feel free to join us on discord to get to know the rest of us!

Please consider delegating to the @stemsocial account (85% of the curation rewards are returned).

You may also include @stemsocial as a beneficiary of the rewards of this post to get a stronger support. 
 

0
0
0.000